There are a couple of ways you can set up Word 2007/2010 to use SEQ fields for numbering — you can set them up as AutoCorrect entries or as Quick Parts. Both ways work; the method you choose is up to you. This long article describes how to create the SEQ fields and the numbering style in your Normal.dotm template; how to save the SEQ fields as AutoCorrect entries in Word 2007/2010 (and how to use them); and how to save (and use) them as Quick Parts. The most consuming part of this process is settings up the fields and the style; once they’re set up, using them is super easy.

I like where your idea is going, but I cannot figure out how to consecutively number across text frames on one document. So far I have created a csv document in Excel, drew a textbox, imported the csv file into the Data Merge window and dragged it into the text frame. Now, I've got "<<00001>>" in the text frame. When I click "Create Merged Document" I get an error message: "Cannot creat merged document because no placeholders are present..." Now what?
In answer to your first question, I don’t believe there’s any way to add your own heading names to the list of Chapter heading options in the Caption numbering dialog box. I tried creating a new heading style and setting it to Level 1 (on the Paragraph dialog box), but it didn’t put it into the list. That’s all I could think of that might set it, but it didn’t work.
Some non-freeways use exit numbers. Typically these are rural roads built to expressway standards[citation needed], and either only the actual exits are numbered, or the at-grade intersections are also numbered. An extreme case of this is in New York City, where the Grand Concourse and Linden Boulevard were given sequential numbers, one per intersection (both boulevards no longer have exit numbers as of 2011). A milder version of this has been recently used on the West Side Highway, also in New York, where only the major intersections are numbered (possibly to match the planned exits on the cancelled Westway freeway). Another case is the Nanaimo Parkway in Nanaimo, British Columbia carrying Highway 19, where all exits are numbered though all except one are at-grade intersections. Some other intersections on Highway 19 outside Nanaimo are also given numbers.

The partial sums themselves form a sequence {\displaystyle (S_{N})_{N\in \mathbb {N} }} , which is called the sequence of partial sums of the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} . If the sequence of partial sums converges, then we say that the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} is convergent, and the limit {\displaystyle \lim _{N\to \infty }S_{N}} is called the value of the series. The same notation is used to denote a series and its value, i.e. we write {\displaystyle \sum _{n=1}^{\infty }a_{n}=\lim _{N\to \infty }S_{N}} .
I need a running number from 1001-1200, so after I apply the print merge, it creates 200pgs of the voucher.When I try to save this file, it takes almost half an hour to do so.I think this is due to the heavy file size?In addition, the local print shop knows nothing about print merge and imposition, so I have to prepare the artwork readily in A3 size to print.The imposition creates a 10pgs files.I wanted to save this as PDF to preserve the color, but it turned out to be a nightmare (in daytime) for me that it takes more than2 hours to generate the 10pgs PDF.
If you want to use a bullet found in a specific font (such as the pointing hand from Dingbats), be sure to set the bullet to remember that font. If you use a basic bullet character, it’s probably best not to remember the font, because most fonts have their own version of that bullet character. Depending on whether you select the Remember Font With Bullet option, a bullet you add can reference either a Unicode value and a specific font family and style, or just a Unicode value.
Hi, I am creating a process map in Visio, is it possible to get Visio to number my boxs on my flowchart. At the moment I create the shape, put the text in but I have to manually put the number before the text, can visio do this automatically. Thanks Glenn In Visio 2003, try Tools > Add-ons > Visio Extras > Number Shapes. The same feature can be found in previous versions under Tools > Macros. -- Mark Nelson Microsoft Corporation This posting is provided "AS IS" with no warranties, and confers no rights. "Glenn Robertson"
In summary, paragraph numbering is really just an exercise in logic, and this blog post is showing the numbering styles for a very specific project. Your project may be similar, but not exactly the same. You just need to think though the levels and how you want to restart the numbers. I do my best to think it through correctly the first time, set it up, and then try as hard as I can to break it, so that I can find my errors. The good news is that once you get your numbers working, you shouldn’t ever have to think about it again.
So, as an example, I’ll start with the style linked to the interrogatory in my multi-level list, type my question, hit return and I’ve got the answer space. Return again, another interrogatory ready to go. Wanted request for production instead of interrogatory? Hit the tab key and it switches to the next list level, which is request for production. (I hope I’ve explained this well enough.)
In a legal document, it's rare for every paragraph in the document to be numbered. Usually, you change between numbered paragraphs and non-numbered (plain) paragraphs of text. When Word sees you switching between these types of formats, it usually tries to help by restarting your numbered list back at "1" (or the first value of your list, such as "A"). There are a few different ways to make the number follow the last number of your paragraphs. In Word, this is called Continue from Previous List.

Angie, have tried your method; however, I encountered what I surmised was a limit on the amount of characters allowed in that “Enter formatting for number” box: for instance, I can only type as far as “Request for Productio” (excluding quotations)- additional text and codes delete and default back to the incomplete phrase “Request for Productio”. Seems to have a default of 26 characters – anything exceeding that is deleted. The phrase “Request for Admission” completes, but am unable to include anything after that phrase of 26 characters. Not sure why that is, but that’s what I run into when I attempt using the multi-list option.
John, Sorry for the delay, but I was away last week with limited Internet access. I assumed if you had a Save button, you would know how to put code behind it. To see the code behind a button, Select the button in Form Design Mode and open the Properties Dialog (Right click and select properties), on the Events tab there should be something in the On Click event of the button. If you click the Ellipses […] next to the event, it will open Code Builder where you can enter the code.

Thank you very much for this very useful information. May I ask how I can stop the whole document captions from being updated to the same numbering style? The problem is some of my figures are under a level 2 heading and some under a level 4 heading etc. I want to be able to have for example figure 1.1-1 as well as figure 2.3.1-1. Thank you very much.


I have a document where in I have to make two kinds of page numbering, A catalog (individually made) which should always start at page 1, and the other is a compiled version where the pages should be a continuous page. They both have the same content but with different output so I tried using layers, but fail to set the page numbering to auto. because setting them would affect both layers.
You’ve got some tips to help make your raffle more successful. You’ve got several free Word ticket templates to choose from. You know how to sequentially number tickets in two different ways. All that is left for you to do is go sell those tickets, have the draw, and then feel good about helping someone out. All for pennies on the dollar over ordering custom made tickets.
In the Republic of Ireland, junction numbers have existed since the opening of the first section of the M50 motorway in 1990, however due to the short length of Irish motorways until the early 2000s they were normally ignored by the general public. They are beginning to come into popular usage now, and since 2005 have been given greater prominence on road signs. With the development of the inter-urban motorway network under the National Development Plan and Transport 21, the National Roads Authority has adopted a numbering scheme for the inter-urban roads that will see Junction 1 being designated as that road's junction with the M50 in most cases. This has meant renumbering of existing junctions on some motorways, most notably the M7 motorway. Non-motorway dual carriageways forming part of major inter-urban roads also have junction numbers, however only grade-separated interchanges are numbered.
This is how I see it. A person (passenger) makes a reservation. If the person has never made a reservation before, then they are added to the passenger table, But it really makes no sense to assign a sequential number to the passenger. Otherwise, an entry, just needs to be made in the reservations table. The Reservation needs to include the specific train (number and date so there should be a table for train schedules so all you need is a foreign key), the passenger and date of travel. Here I can understand wanting a sequential number to show passengers booked in a day.
Most European countries use sequential numbering schemes. Spain uses distance-based numbering on its Autovias, but not on its Autopistas. Austria and the Czech Republic use distance-based schemes. A number of European countries (including the Netherlands, Belgium and France) do not number motorway intersections, apparently because one cannot "exit" the motorway there. Countries like Germany and Switzerland have attributed numbers to their exit, but instead of the usual exit symbol, they are given a specific interchange symbol.

I would like to number a voucher book, i have place 4 vouchers on a page, the thing is that i want each of these vouchers to start with different number, 100, 200, 300, 400, and then i want to number them 99 times. The problem is that they have to be numbered only 1 per page, so that when i have printed them all i can easily crop them and staple them right up with having to go through it all.

Both the Collection Point ID and Artifact ID fields are bound properly and display those exact names in the property sheet under both control source and name. On the save button I have on the form, when I click on the event tab and the on click option I have event procedure and I click the […] option to open up the code builder and this is what I currently have:


Tip  Follow the same steps (above) to create Request for Production or Request for Admissions. The only difference would be in Step 3, you would change the "rog" to "rpf" or "rfa". This will keep unique numbering schemes running in the same document. Therefore, you could have an Interrogatory No.1 as well as Request for Production No.1. Keep in mind that if you cut, copy or paste sequence codes, you'll need to select them and press F9 to update the field codes. They do not update automatically.
Law firms use numbered lists daily to prepare contracts, pleadings, letters and memos. Word makes activating and customizing numbering fairly straightforward. You can create simple numbered lists, such as A, B, C and 1, 2, 3. You can also customize these lists to setup specific numbering styles for your firm and practice group. Multilevel lists such as I, A, 1 are handled through Word's Outline Numbering feature, which is explained later in this chapter. Many firms rely on outline numbered lists to draw up contracts and pleadings. Like numbered lists, outline numbered lists can be customized.
A defined list can be interrupted by other paragraphs and lists, and can span different stories and different documents in a book. For example, use defined lists to create a multi-level outline, or to create a running list of numbered table names throughout your document. You can also define lists for separately numbered or bulleted items that are mixed together. For example, in a list of questions and answers, define one list for numbering the questions and another for numbering the answers.

An alternative to writing the domain of a sequence in the subscript is to indicate the range of values that the index can take by listing its highest and lowest legal values. For example, the notation {\displaystyle (k^{2})_{k=1}^{10}} denotes the ten-term sequence of squares {\displaystyle (1,4,9,...,100)} . The limits {\displaystyle \infty } and {\displaystyle -\infty } are allowed, but they do not represent valid values for the index, only the supremum or infimum of such values, respectively. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }} is the same as the sequence {\displaystyle (a_{n})_{n\in \mathbb {N} }} , and does not contain an additional term "at infinity". The sequence {\displaystyle (a_{n})_{n=-\infty }^{\infty }} is a bi-infinite sequence, and can also be written as {\displaystyle (...,a_{-1},a_{0},a_{1},a_{2},...)} .

Hi All, I am working on a YTD Sales report. I would like to know if I can create a cell in a query that will be a squential number. Starting with 1 on up. If so how would I do this? Report would look something like: Num Customer YTD Sales 1 Bobs Sales 495,000 2 Denny's 395,000 3 Biffs Supply 390,000 4.... -- Matt Campbell mattc (at) saunatec [dot] com Message posted via http://www.accessmonster.com You can use a text box in the report: Control Source: =1 Running Sum: Over All -- Duane Hookom Microsoft Access MVP "mattc66 via AccessMo...


Drag the number, which Publisher defaults to “1,” into place on the ticket. To change the sequence, such as to start with “100” instead of “1,” click the “Page Number” button again and choose “Format Page Numbers.” Click the “Start this section with” radio button and type the new number into the field. Click the “OK” button to have Publisher update the ticket number.
One of the easiest ways to begin applying numbers is by starting to type a numbered list. Word recognizes that you are creating a list and responds accordingly by converting text that you type into numbered items. The number scheme, delimiter characters that mark the beginning or end of a unit of data and formatting are all based on what you have typed.
Number Pro does not create your raffle ticket or document it just allows an easy way to  number them. Check out Number Pro, take a look at the demo videos and even try the demo of Number Pro to see how it works. Number Pro is a cloud based application meaning there is no download of the application. We access the application online in the members area. They offer a three year membership with unlimited use.
I to, have read through your directions while using both mac & pc platforms. I fail to find the “standard features” screen shots that you show above in either program. I too have spent several hours trying to get the sequential 3-up numbering as described. In trying to produce 300 tickets, I can get all of the first numbered position to be sequential over 100 pages. But, when moving down to the second or third ticket position on the page and setting up the numbering, I repeatedly find that I get a repeat of the first 100 numbers. I am lost as to how to proceed. Is there any other missing step or info that I am assumed to have knowledge about that was not mentioned above? If you know of some other site that might explain this process any better, please post. Thanks for your help.
The sequential numbers required for the stationery are typically prepared in a spreadsheet such as Microsoft Excel and then exported as a txt or csv file for use with the Data Merge palette. However, a free script called Indys Number Generator written by Stanislav Antos can create sequential numbers without having to open any spreadsheet software. The script has been available for some time but I feel it is a hidden gem and definitely worth discussing.
If the list you want is as simple as "1", "2", "3", you'll appreciate how easy it is to apply this type of numbering in legal documents. Simple numbered lists are different in Word 2000 than they were in Word 97. In Word 2000, the default for even the most basic list is multi-level. For example, if you number an item and press Enter and then press the TAB key, Word automatically formats this number as the second level in an outline numbered list format. Single and multi-level numbering are explained later in this chapter.
I would like to number a voucher book, i have place 4 vouchers on a page, the thing is that i want each of these vouchers to start with different number, 100, 200, 300, 400, and then i want to number them 99 times. The problem is that they have to be numbered only 1 per page, so that when i have printed them all i can easily crop them and staple them right up with having to go through it all.

So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
Hi, this is a great write up. I am very new to InDesign and i print onto a range of products and my first order with sequential numbering came up (serial numbers), I have the template made in illustrator and i also have the numbers added (00001 on all of the art work). A friend told me InDesign has a function for automatically incrasing the numbers by 1 for each art work. I have 105 pieces per template, is there a way to import the design and then sort the number (already text edible) and then save as a pdf then send to print?
Hi All, I am working on a YTD Sales report. I would like to know if I can create a cell in a query that will be a squential number. Starting with 1 on up. If so how would I do this? Report would look something like: Num Customer YTD Sales 1 Bobs Sales 495,000 2 Denny's 395,000 3 Biffs Supply 390,000 4.... -- Matt Campbell mattc (at) saunatec [dot] com Message posted via http://www.accessmonster.com You can use a text box in the report: Control Source: =1 Running Sum: Over All -- Duane Hookom Microsoft Access MVP "mattc66 via AccessMo...
Thank you very much for this very useful information. May I ask how I can stop the whole document captions from being updated to the same numbering style? The problem is some of my figures are under a level 2 heading and some under a level 4 heading etc. I want to be able to have for example figure 1.1-1 as well as figure 2.3.1-1. Thank you very much.
Running captions number figures, tables, and other items consecutively in a document. For example, the first figure caption starts with the words “Figure 1,” the second with “Figure 2,” and so on. To make sure that figures, tables, or similar items are numbered consecutively, define a list for the item, and then create a paragraph style that includes the list definition. You can also add descriptive words such as “Figure” or “Table” to the numbering scheme of the paragraph style.
With this expression we check only for records that are in the same year as the Inquiry date to increment the sequence. Again, the NZ function will automatically restart the sequence with each year. Cleary, though, we cannot generate this number until the InquiryDate has been entered. Is this value is a user entry, then you may want to check that it’s filled in before generating the number. Something like:
Thank you for your reply.  It reassured me that I was on the right path. From having read other Help texts, I guessed that I would have to use good ole mail-merge and set up a numbers list in Excel. Luckily my knowledge of Excel was good enough to know about the drag&drop for sequential immediate numbering. When it came to the crunch, it was this particular type of mail merge which gave me a bit of initial difficulty. Despite my having used it happily and often in Word, for labels in Publisher, it was - not surprisingly - different in certain respects; principally the crucial point of the Print stage, which necessitated finding the option Publications & Paper Settings, and selecting 2 specific parameters, namely (1) Multiple pages per sheet,  (2) Single-sided printing (my default double printing had appeared). Once I'd sussed this, it was plain sailing.  Thanks again.
If you’re producing any kind of numbered items in-house that are multiple-up on a sheet where you need to control all the variables to meet your production needs, the autonumbering feature through numbered lists is the way to go! Just step and repeat away & InDesign will do all the work. No need to fool with a seperate “numbers” file or deal with a data merged document. I think it’s by far the best option for basic numbering.

I like where your idea is going, but I cannot figure out how to consecutively number across text frames on one document. So far I have created a csv document in Excel, drew a textbox, imported the csv file into the Data Merge window and dragged it into the text frame. Now, I've got "<<00001>>" in the text frame. When I click "Create Merged Document" I get an error message: "Cannot creat merged document because no placeholders are present..." Now what?
Neither the owners, employees, officers nor directors of Signs 101 shall be held responsible or liable under any legal theory for any loss or injury resulting from any post, information made available, policy, action or lack of an action at Signs 101. Your use of this website is your acceptance of these terms and conditions of use. A Eon Media,LLC Company
I have a file that displays the text "Page 1" in the center of the worksheet. I have not been able to find a way to stop the page number from displaying. There is no header/footer, no "background", no other special items that I could find that would force the display of this. It does not appear during the printing so it's not a "watermark". It merely displays in my view when I'm working in the worksheet. Help... Hi you're in page break preview view ... choose view / normal from the menu Cheers JulieD "whalenohana"
A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.
A best practice that we recommend to our clients is to create a base/folio master –with styled and positioned footers and current page number special characters– on which all other masters are based. This allows a footer that may contain date or issue information to be updated once and the changes are reflected in all of the master pages. If your masters only have current page number special characters then you can just add them to each master and the page numbers will be reflected when each master is applied to your document pages.
I’d like to share my solution. It came to me partially in my sleep, I tried refining it this morning but because of time, finally had my production person print the manually numbered tickets so that we could deliver them to the customer who needed them today. Here is my solution. I deduced that it would be better to let a program designed to count, do the counting. I used Excel. I then let InDesign CS4 do the merging. Here’s the formula.

Word templates are wonderful things. Microsoft, and hundreds of other people, have created some great free templates for almost everything. With these free templates you can make meeting agendas The 15 Best Meeting Agenda Templates for Microsoft Word The 15 Best Meeting Agenda Templates for Microsoft Word These meeting agenda templates for Microsoft Word can get you off to a great start for any type of meeting. Read More , beautiful flowcharts How to Create Stunning Flowcharts With Microsoft Word How to Create Stunning Flowcharts With Microsoft Word Used with imagination, flowcharts can simplify both your work or life. Why not try out a few flowcharts with one of the easiest tools on hand – Microsoft Word. Read More , professional resumes How to Create a Resume Template with Microsoft Word How to Create a Resume Template with Microsoft Word Your resume could be the difference between interviewing for the job of your dreams or never hearing back from the employer — use these tips to make sure it's the best it can be. Read More , and custom calendars 10+ Sites to Find the Perfect Free Printable Calendar Template All Year Long 10+ Sites to Find the Perfect Free Printable Calendar Template All Year Long You can never have enough reminders that your most valuable personal resource is limited. Our selection of printable weekly, monthly, and yearly calendars will help you manage your time wisely. Read More in minutes. A custom calendar might be a good fundraiser, too!
This one is EASY. In InDesign, with a one-sided NCR form, cut the all elements from the first page. Go to your Master page and place. Where you are going to number the forms, draw a text box and insert a page number marker there. Format it to your liking, then insert as many pages as SETS are going to be made. When you go to print, enter 2 or 3 in the copies box, depending if it's 2-part or 3-part and under the properties button, select GROUPED or UNCOLLATED, turn off OFFSET. Violá!

The next step is to create the simple Excel workbook that contains the ticket numbers. Open a blank Excel sheet. Using Figure B as a guide, create the ticket numbering sheet and save it, making sure to note the new workbook's name and location. As we discussed earlier, the Excel workbook stores the ticket numbers. In this example, we'll create 11 tickets numbered 100 through 110. You'll need to update the ticket values for each merge.


The process described in this tip works best if you have a single list in your document. Note that the sequence field starts at the beginning of the document and numbers through the whole document, based on the identifier you use. If you are going to have multiple lists in your document, then you can add a second AutoText entry to help with this. The only difference in the above steps is that the SEQ field you define would look like this:
Corel crashed repeatedly on my production person today while he was trying to number them using the plug-in. I couldn’t figure out how to make Mike’s script work. It appeared designed for variable numbers in one place. My customer needed her tickets numbered in two places, on the ticket and on the stub. Because she needs them tomorrow there is no time to send them out to be numbered manually. I’ll keep watching this space for more info. Thanks folks.
This difference is not simply a case of syntax. In order to provide a large workspace, conventional spreadsheets extend a table in X and Y to form a very large grid – ideally infinite, but normally limited to some smaller dimension.[N 2] Some of these cells, selected by the user, hold data. Data is manipulated using formulas, which are placed in other cells in the same sheet and output their results back into the formula cell’s display. The rest of the sheet is “sparse”, currently unused.[5] Sheets often grow very complex with input data, intermediate values from formulas and output areas, separated by blank areas. In order to manage this complexity, Excel allows one to hide data that is not of interest,[6] often intermediate values. Quattro Pro commonly introduced the idea of multiple sheets in a single book, allowing further subdivision of the data.
InDesign allows you to add a page number marker to a master page within the document. The master page functions as a template for every page it's applied to, so the consecutive page numbers appear on every page. InDesign updates the page number automatically as you insert, delete and move pages. To add a page number marker to a master page, create a text box on the master page by going to the Type menu and choosing "Insert Special Character," "Markers" and then "Current Page Number."
One other thought. It may not hurt to make option 1 a logical expresssion where it will update the number IF a number other than 0 already exists for it. This will prevent it from giving a new number if you go back, edit it and save it. I accomplished this by adding the following (roughly): If PONo=0 Then My.PONo…. (Expression and save command) Else (Save Command)
I am having trouble with this procedure. My situation is almost identical to example #2. I want to populate RecordNumber on my form with a date number like “130001, 130002, etc.” where “13” is the year based on a date automatically generated in the OpenDate field in tblLogRecords. OpenDate is a date/time type field that has a default value of the date the record is created and is not editable. I have added a field called Sequence to tblLogRecords and it is a Number, Long Integer type. I also created a bound control for Sequence on my form. I have a completely separate autonumber field as the PK.
I created something like this for a demo and didn't have to use a script. If I remember correctly, I leveraged Workflow. Essentially, the form submission would trigger a very simple workflow that would look at the current counter value on a database table and increment it by 1. The next form would then start with a lookup that would grab that counter and put it into a read-only (or hidden) field. Rinse and repeat.
×