NCR (no carbon required) or carbonless forms, like the name suggests, have eliminated the need for carbon paper between sheets to create multiple copies of the same form. The paper is chemically treated to transfer the impression from the first page to the subsequent pages with very little pressure. This works because the bottom side of carbonless NCR paper is coated with micro-encapsulated dye that breaks when pressed. The top of the susequent sheet is coated with clay that reacts with the dye to form a permanent mark. When the top sheet is written on, the pressure causes the micro-capsules to break and release the dye onto the page beneath it.
I removed the required setting on the table level. The form does not give me an error message now, but does not close on its on. I closed it via a command then looked at the Design Projects table to see if the new record, #896, shows up. A new record is there, with all the entered data EXCEPT the very important field of the Project ID. That field is blank.
The next step is to create the simple Excel workbook that contains the ticket numbers. Open a blank Excel sheet. Using Figure B as a guide, create the ticket numbering sheet and save it, making sure to note the new workbook's name and location. As we discussed earlier, the Excel workbook stores the ticket numbers. In this example, we'll create 11 tickets numbered 100 through 110. You'll need to update the ticket values for each merge.
A note about link exchanges. This site does not participate in link exchanges to build web presence. If you have a link that you think would be of use to people reading this page, please send it to the webmaster with the url of the page where you think it should appear and it will be considered. Your placing a link to this site will not affect the decision on whether to add your link, though.
I know that I can select all of the clips and then move the play head to approx 1/10 of a second and split the clips. This works except I have to go through and manually delete the bits I don't want which is tedious enough for a video with 82 images but I am planning on longer projects, doing it manually would be a nightmare. Also I could probably re-order the images manually but I am sure that there must be an easier.
Please guide me that i have Purchase order in one excel sheet i.e 200 pages i want to know any formula for footer page number which should be permanent Means i have 1st purchase order of 3 pages, 2nd purchase order for 4 pages and 3rd purchase order for 2 pages. each purchase order has different Serial number but all in one excel sheet i.e sheet1. i inserted footer page no of ? which generate 1 of 9, 2 of 9 etc. Please guide i want to segerate the footer page number for 1st page order 1 of 3, 2 of 3 and 3 of 3. 2nd purchase order should have footer page number 1 of 4, 2 of 4 etc and hence for 3rd purchase order. looking forward for your guidance
GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.
Bullets and Numbering options in InDesign aren’t just for boring lists. You can auto-number items like captions, even incorporating prefixes like figure labels. Depending on how your document is set up, there are two ways to achieve this. Both involve setting up a paragraph style that incorporates numbering from the Bullets and Numbering feature. Generally I create a temporary text frame—often on my pasteboard—and set some items to create my style, pasting the text into my actual caption frames after the fact.
Sequential exit numbering usually begins with exit 1 at the beginning of the road; each subsequent exit is given the next number. Letter suffixes are commonly used when new exits are added. For example, on the New York State Thruway, an exit was added between 21 and 22, and was given the number 21A. Subsequently, a new exit was added between 21 and 21A, leading to the sequence 21 - 21B - 21A - 22. In Florida, some new exits got the suffix C, so that if it had or acquired separate exits for the two directions, they would be 15CA and 15CB rather than 15AB. There are also occurrences of this happening on the New Jersey Turnpike; the original interchanges opened in 1951, with newer exits as recently as 1982. On the Baltimore Beltway, there is an exit 12B-C (MD 372), as well as 12A (US 1). There is also an exit 8A (I-895) and an exit 8 (MD 168).

With this expression we check only for records that are in the same year as the Inquiry date to increment the sequence. Again, the NZ function will automatically restart the sequence with each year. Cleary, though, we cannot generate this number until the InquiryDate has been entered. Is this value is a user entry, then you may want to check that it’s filled in before generating the number. Something like:
It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!
Hi All, I am trying to programmatically place labels on my scatter chart. I used the following [snip] DataLabel.Left =10 But it bases the 10 from the corner of my chart. Is there a way to base it on the relative node? Thanks Chad Excel 2007 Relative to SeriesCollection.Point: http://c0444202.cdn.cloudfiles.rackspacecloud.com/11_10_09.xlsm Relative to dynamic PlotArea and dynamic curve: http://www.mediafire.com/file/ynzt3crq0nk/02_14_10.xlsm ...

You can add a chapter number variable to your document. Like page numbers, chapter numbers can be updated automatically and formatted and styled as text. A chapter number variable is commonly used in documents that are part of a book. A document can have only one chapter number assigned to it; if you want to divide a single document into chapters, you can create sections instead.
OK, so what didn’t you understand in my blog? The blog contains instructions on how to deal with this. It tells you that you do not want an LH Identifier field. It tells you that all you need is to add a Sequence field to store the Sequential number. It tells you how to base that number on the current year so it restarts with the new year, Finally it tells you how to combine the year and the sequence # with whatever else you need to display the LH identifier. These instructions are all detailed in the blog.

Hello! I would like to chart varying salaries against specific Low, middle and high numbers. Any suggestions on how to show this? Example: Salary 1 10000 Salary 2 12000 Salary 3 16000 Low 9000 Mid 15000 High 19000 THANK YOU! Do you want the Low-Mid-High values to be like a benchmark to measure salaries against? You could put horizontal lines across your chart, and use markers for the salary data. Here' a few ways to get your lines: http://peltiertech.com/Excel/Charts/AddLine.html - Jon ------- Jon Peltier, Microsoft Excel MVP Peltier Technical Services Tutorials...


I'm producing gift certificates for a restaurant and they need to be numbered sequentially from 0001 to 0250. Is there any way to do this easily as opposed to numbering each manually? I'm sure I could probably work it out with a print shop, but the job was thrust on me last minute and my options are limited by the short turn around time. Any help would be appreciated. Thanks!...
LION Automatic Numbering Machines are the highest quality and the most durable stamps in the market at prices less than the competition. LION machines are precision crafted of one-piece hardened steel and finished in rugged, high-polish chrome. Ideal for sequential numbering operation to use as date and number stamp, serial number stamp, inspection stamp, etc. Customizing is also available so that it can work to your exact specifications. Made in Japan.
You can change the numbers in the list by restarting the sequence or by specifying a new start number. You can change the list's style. You can do anything to this list that you can do to a normal numbered list because it is a numbered list, with one exception: the list, while easy to format, is fixed. If you delete an item, the list updates accordingly, but I haven't found a way to add numbers.
×