We use the auto page numbering trick here, the trick is to do it as spreads. You just make your pages the same size as the ticket with crops and bleeds. Then set up the shell on the master page and place your auto page number where you want your numbers. Each pages is the next number. You can also have two sets of numbers for perforated ticket. You then can use the page start options to add to the numbers and keep the same number of total numbers. For example you would do a new page start after number 99. 0001 to 0099 so it doesn't add two "0's" to the front of 100 and you get 00100 when you want 0100. Works great for small quantities, we have done up to 1000+ tickets and once you do it once or twice it is a snap to set up. To avoid having to do 1000 pages just send the tickets in groups. Usually between 25 to 100 at a time works good depending on artwork file size. Just save each time before sending to printer and name the file with what the tickets are. Like "MyTickets-0001-0100.Indd". Makes it easier to go back if you have a problem. You can even do two rolls of tickets if your using 12 x 18 sheets by flipping the sheet and doing one row along the top and one along the bottom on reverse side. That is if your ticket is single Sided. Two sided tickets are a bit trickier. :-)
A defined list can be interrupted by other paragraphs and lists, and can span different stories and different documents in a book. For example, use defined lists to create a multi-level outline, or to create a running list of numbered table names throughout your document. You can also define lists for separately numbered or bulleted items that are mixed together. For example, in a list of questions and answers, define one list for numbering the questions and another for numbering the answers.

While InDesign veterans may assume everyone already knows this, I can assure you I have worked with very sophisticated documents from designers who did not take advantage of this basic feature. A good rule of thumb to keep in mind as you tackle InDesign challenges is this: If it’s repetitious, tedious, or time-consuming, there’s probably a built-in solution right there in the program. You just need to go look for it.
All I want to know is, how do you link fields, like {SEQ}, to a style – so that if I select/apply style “Figure Caption” (my style, I also have “Table Caption”), I get not just the attributes of the style (what it looks like, where it is on the page etc.) but I get a chapter (or section) number + a sequence number added, (e.g. “2-3”). I know about STYLEREF and SEQ Figure # and/or calling a section number (if required) – but I can’t find out how to take the simple and to me obvious step to have sequential numbering (prefixed with either “Figure” or “Table”) attached to my Figure Caption style. It all seems to be a two-step process: (i) select the style, (ii) select the numbering. I want to do both at style level. I want to see/get (e.g.) “Figure 2-3: Linking figure numbering to styles” just by applying my “Figure Caption” style to my figure caption text “Linking figure numbering to styles”. Please, only tell me how to do that, how to link chapter/sequence numbering via a style – i.e. in just one step – applying the style.
Is there a way to code the special interrogatory numbers wherein the identify of documents is requested such that those specific special interrogatories (and only those specific special interrogatories) are automatically generated in a separate demand for production of documents? In other words if Special Interrogatory numbers 3, 6, 9, 12 request identification of documents, is there a way to code those special interrogatories so that within the demand for production of documents, those specific but individual special interrogatory numbers can be referenced?
Erica Gamet has been involved in the graphics industry for an unbelievable 30 years! She is a speaker, writer, and trainer, focusing on Adobe InDesign and Illustrator, Apple Keynote and iBooks Author, and other print- and production-related topics. She is a regular presence at CreativePro Week’s PePcon and InDesign Conferences, and has spoken at ebookcraft in Canada and Making Design in Norway. You can find Erica’s online tutorials at CreativeLive and through her YouTube channel. When she isn’t at her computer, she can be found exploring her new homebase of Seattle and the greater Pacific Northwest.
Determine what kind of numbering you want to use for your document or book. For long documents, you can assign chapter numbers. Each document can be assigned only one chapter number. If you want to use different numbering within a document, you can define ranges of pages as sections; these sections can be numbered differently. For example, the first ten pages of a document (the front matter) might use Roman numerals, and the rest of the document might use Arabic numerals.

Developing Document Control and Image Numbering Systems. The document and imaging numbering or coding system for your application gives you control over the documents. If you are going to image documents, the document database record number and the image record or file number may be the same number. A document and imaging numbering or coding system can be very simple or sophisticated, depending upon your desires and the needs of a particular case. Below are three possible methods of coding your documents and images:

How do I set up the basic template for text numbering in Word 2008 for the Mac? Here is what is driving me nuts: I want to generate numbered lists - lots and lots of them. The first level numbered lines will have second level under them in many cases, also numbered and indented below the first level. The second level will also have third level under them, intended some more and also numbered. This "sort-of" works fine. It USED to work excellently. Here is what I do. I click the Numbering button in the Bullets and Numbering palette. The line indents and a 1) is aut...
If you want to save all that work you just did, click the Save button. As you exit Word, the Building Blocks (the feature Quick Parts and AutoText are grouped under) are being saved in your Normal template. If you’re really up for a challenge, you could start a whole new discovery template with its own set of Building Blocks like the ones above, then distribute it to your work group so they can get the benefit of your new-found expertise.

My quick process involves setting up a row of plaques with a01, a02, a03, thru a09. Then copy the plaques to the clipboard. Run the REPLACE TEXT feature to replace "a" with "1". Move row down and paste clipboard back into page. Run REPLACE TEXT to replace "a" with "2". Repeat until I get all the numbers. It's faster than manually typing the numbers in but I know there's go to be someway of automating the process.

Law firms use numbered lists daily to prepare contracts, pleadings, letters and memos. Word makes activating and customizing numbering fairly straightforward. You can create simple numbered lists, such as A, B, C and 1, 2, 3. You can also customize these lists to setup specific numbering styles for your firm and practice group. Multilevel lists such as I, A, 1 are handled through Word's Outline Numbering feature, which is explained later in this chapter. Many firms rely on outline numbered lists to draw up contracts and pleadings. Like numbered lists, outline numbered lists can be customized.
Infinite sequences of digits (or characters) drawn from a finite alphabet are of particular interest in theoretical computer science. They are often referred to simply as sequences or streams, as opposed to finite strings. Infinite binary sequences, for instance, are infinite sequences of bits (characters drawn from the alphabet {0, 1}). The set C = {0, 1}∞ of all infinite binary sequences is sometimes called the Cantor space.
I am trying to create a macro for outlook 2016 appointments that would add a number sequentially each time the appointment template was opened. I need to run this under public user so as others open it will give next number. Thank you in adance here is form Sequential Number Here Outside Assignment #: Click here to enter text. Court Reporter Needed: Click here to enter text. Job Type: Click here to enter text. Referral: Click here to enter text. Assignment Date: Click here to enter a date. Contact: Click here to enter text. Time: Click here to enter text.… Read more »
I thought I'd try and just create one decal and use the print merge feature but I don't print from my workstation. I create the design in X7 then export it to a RIP Station for print. I thought I'd just do the print merge and print as pdf just to get the numbers without typing them. That gets me all the numbers in sequence but all on 500 separate pages.
Another fan of Fusion Pro Desktop here. This is exactly what you need. We have sold both PrintShop Mail and Fusion Pro Desktop for this very application (numbering) and other VDP applications. Fusion Pro Desktop easily beats PrintShop Mail from both a price and performance viewpoint. You could also try Printer's Bench http://www.elkriversystems.com/ProductsList.aspx for a good entry level package
The blog is pretty much step by step. Where it may not be that specific is, because, these are decisions the developer needs to make. For example, where to put the DMax expression is a matter of your workflow so I can’t tell you where to put it. I’ve given tips in the blog to help you decide. If you are having issues, then please give me more info about your application and I can suggest things.
Hi! I hope you help me with this. I have the almost same problem as #2. I have PassengerTable as table name, then I have the following fields: sequence (to follow what you have in your post), transaction_date, and transaction_ID. Basically I want the to have sequential numbering in the transaction_ID where month and date from transaction_date is shown. i also have a generate (Command27)button as trigger.Tried the code with few modifications, but it sequence doesnt populate, and doesnt show any, except for what i have in control for transaction_ID which is the “Format(transaction_date,”yyyy-mm”) & “-” & Format(sequence,”000″)” and this only shows the year and date, so instead of 2015-08-001 it shows 2015-08-.

In this scenario we are assuming that there will be no more than 999 documents attached to a case. In Scenario 2 we assumed no more than 9999 inquires during a year. So you need to adjust the number of zeros when formatting Sequence for the anticipated number of records. Of course this can always be changed later. You also don’t need to format the sequence with leading zeros as the Format function does. As shown the expression returns something like: DCASD/CI123-025 for the 25th document in case CI123 for client DCASD. Without leading zeros it would be: DCASD/CI123-25. The advantage to the latter is that you don’t have to anticipate the number of records you might have in the sequence, but I’ve found many users prefer a more uniform number with the leading zeros.
As I indicated, because you want to only generate this number just before saving, I would put this code behind a Save button or another event that runs just before you save the record. So if you want to prevent duplications, you don’t use the expression as a control source, but put the code behind a button or event. Since you have a Save button, put it there.
The sequential numbers required for the stationery are typically prepared in a spreadsheet such as Microsoft Excel and then exported as a txt or csv file for use with the Data Merge palette. However, a free script called Indys Number Generator written by Stanislav Antos can create sequential numbers without having to open any spreadsheet software. The script has been available for some time but I feel it is a hidden gem and definitely worth discussing.
GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.

Hi – are you creating your own tickets using the instructions on this page? If so, you can of course change the font and everything else in your Word document. If you are using the Raffle Ticket Creator app (app.raffleticketcreator.com) then you can’t change the font size … you’ll just need to tinker with the exact words that you are including in order to get them to fit on the page. Hope that helps!
I have a similar question about numbering – but a bit more complicated. U want to convert the caption number sequences from a single number sequence to reflect the heading that the table/figure is sitting under. For example, if it’s sitting under heading 6.2, the first table or figure would be Table/Figure 6.2 a, then 6.2 b and so on, until after the next heading, where they would start again – 6.3 a and so on. How do I do that?!!
It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!
Bottom Line – So, is there: (1) any way to “save” “Auto Text” entries (or similar) so that several people in the office (i.e. attorney, paralegal, secretary, etc.) can “share” and have access to the same set, and thus work better as a “team”?; and (2) if/when a set of “Auto Text” entries is so saved and created, is there any way to keep it “alive” and “safe” so it “survives” the (inevitable) series of computer updates, fixes, server crashes, etc., that will happen over time in a law office (and even several times during the life a litigation case that may last two years or more in an office)?.
In Excel, I created a file with columns A-H labeled: ticket 1, stub 1; ticket2, stub2; ticket3, stub3; ticket4, stub4. I then numbered two rows across 1 -4, then 5 -8. Then I dropped down to A – H in row 260. (I did this to give 1,000+ numbered tickets.) I then used the Excel fill function chosing series and told the program to skip by 4. It filled the rows. I then saved as a tab delimited text file.

All posts and other information available at Signs 101 should be viewed as the opinion only of the poster. No claim is made that any information is accurate. As such, each reader should not rely on any information available here as accurate and should independently verify such accuracy. In addition, no claim is made that posts made here will be free from profanity, obscenity, rude, hurtful, libelous or insulting opinions of the poster. Such posts should, however, be reported to an Administrator for review.
In the example I explained, I was using a list, but did it with un-linked text boxes using “continue from previous number” and “continue numbers across stories.” I’m guessing that there is no way to tell InDesign that even though there are 4 text boxes on the page, that there are two different lists? I’d probably have to just create two threaded stories for that scenario to work.
LION also carries a heavy-duty, 6 wheel automatic numbering machine with rubber faced wheels. The rubber wheels work great for metal marking and plastic marking when used with LION fast dry ink. As with the other LION numbering machines, this machine is made in Japan with precision crafted one-piece hardened steel frame with all metal interior construction. LION machines will provide years of reliable use. Ideal for sequential numbering operations to use as a date and number stamp, serial number stamp, an inspection stamp and etc.
Similar to Improv, formulas can be represented as icons in Numbers, allowing them to be dragged about the sheets. One noteworthy example of this is a sidebar which contains the sum, average and other basic calculations for the current selection in the active table. These serve a function similar to the sum that appears at the bottom of the window in Excel. However, the user can drag one of the function icons from the sidebar into the sheet to make the calculation appear in that location.[11] In another nod to Improv, the Formula List shows all of the formulas in the spreadsheet in a separate area, and allows edits in place or easy navigation to their use in the sheets.

Here is my problem. i have a series of 3 digit numbers that need to be cinverted to a series of 4 digit numbers using this following 722 needs to read as 5622 and in the next collum SV-7822 in the collum's to the right. what type of formula is this and how can i do it? The above is an example, i have a whole range of 3 digit numbers that need the exact. rules applied to all numbers. which is why i need a formula to do it. Help someone please!!!! I'm not completely clear on what your looking for but if 722 was in A1 in B1: = A1 + 4900 in B2: = ="SV-" & A1 + 7100...


Joshua, I described this problem in my post #5 — the footnote settings are doc-global. I know no present solution to your problem — which is why we still need Adobe to code a counter! And we also need to be able to set up footnotes which are frame-wide, not just column-wide. And, natch, we need headings which are frame-wide, spanning multiple columns — so the ID engineers can’t retire quite yet. :-)
we have printed AP checks using the check number from 0000000001 to 0000000006, but we havent posted those batches. we have only one checbook. Now can we restart the check number from 000001. Then do we need to delete the previous batches for checks printed. What is the best approach in this regard. Thanks in Advance, Arun. In the Post Payables Checks batch window (Transactions > Purchasing > Post Checks), choose the batch in question, then select Reprint Checks from the drop-down list. Enter 000001 for your starting check number. You will also need to go ...

An alternative to writing the domain of a sequence in the subscript is to indicate the range of values that the index can take by listing its highest and lowest legal values. For example, the notation {\displaystyle (k^{2})_{k=1}^{10}} denotes the ten-term sequence of squares {\displaystyle (1,4,9,...,100)} . The limits {\displaystyle \infty } and {\displaystyle -\infty } are allowed, but they do not represent valid values for the index, only the supremum or infimum of such values, respectively. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }} is the same as the sequence {\displaystyle (a_{n})_{n\in \mathbb {N} }} , and does not contain an additional term "at infinity". The sequence {\displaystyle (a_{n})_{n=-\infty }^{\infty }} is a bi-infinite sequence, and can also be written as {\displaystyle (...,a_{-1},a_{0},a_{1},a_{2},...)} .
In this system, the third number (instead of the second) denotes a minor release, and a fourth number (instead of the third) denotes bug-fix/revision releases.[23] Because the first number is always 10, and because the subsequent numbers are not decimal, but integer values, the 11th major version of OS X is labeled “10.10” (rather than 11.0). This number scheme continues above point-10, with Apple releasing macOS 10.13 in 2017.[24]
Klaus Nordby, one of our good-natured Norwegian hecklers, has produced a ray of sunshine in the midst of a deep, dark Scandanavian winter by coming up with a wonderful little trick involving adding sequential numbers inside a paragraph. For example, 1. this is the first clause of this sentence; 2. this is the second; and 3. this is the third. That’s not a big deal to type, of course, but if you had dozens of them and you needed to insert or remove numbering frequently, doing it manually would be a hassle.

My issue is trying to create small dot labels or equivalent to make up sequential alpha numeric labels to identify each individual item that I have in my shop, retrospectively. I have possibly 6-8thousand individual items that need coding for stock take purposes yet I can find no outlet that supply such thing. Do you have any suggestions. My line is antiques/collectables, predominantly china with items ranging in size from 2-3cm to 5/600cm. I would be most grateful for any solutions or suggestions. Best regards. Pete.
A series is, informally speaking, the sum of the terms of a sequence. That is, it is an expression of the form {\displaystyle \sum _{n=1}^{\infty }a_{n}} or {\displaystyle a_{1}+a_{2}+\cdots } , where {\displaystyle (a_{n})} is a sequence of real or complex numbers. The partial sums of a series are the expressions resulting from replacing the infinity symbol with a finite number, i.e. the Nth partial sum of the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} is the number
I am trying to automatically print sequential numbers on individual cards on 8.5" x 11" business card stock (to create tickets) using MS Publisher and cannot figure out how to get it to do this. Does anyone know the secret? Thanks. Hi Scott (scottmarsh@excite.com), in the newsgroups you posted: || I am trying to automatically print sequential numbers on individual || cards on 8.5" x 11" business card stock (to create tickets) using MS || Publisher and cannot figure out how to get it to do this. Does || anyone know the secret? Thanks. Check out the following tutorial:...
If you would like to add an image to your comment (not an avatar, but an image to help in making the point of your comment), include the characters [{fig}] in your comment text. You’ll be prompted to upload your image when you submit the comment. Maximum image size is 6Mpixels. Images larger than 600px wide or 1000px tall will be reduced. Up to three images may be included in a comment. All images are subject to review. Commenting privileges may be curtailed if inappropriate images are posted.
×