As an example of surprising version number ordering implementation behavior, in Debian, leading zeroes are ignored in chunks, so that 5.0005 and 5.5 are considered as equal, and 5.5<5.0006. This can confuse users; string-matching tools may fail to find a given version number; and this can cause subtle bugs in package management if the programmers use string-indexed data structures such as version-number indexed hash tables. Once you are happy with your basic layout, copy everything three times so you have a page of four tickets. At this point, they won't be numbered tickets just yet, you will add the numbers in a moment: Manually, you can obtain what is called a Bates stamper that automatically increases the number on the stamper each time it is stamped on a document. This will assist you in not having to either write the increasing numbers on the document or manually changing a stamper each time you place a number on a document. Hello Bruce, I seem to be having a different problem altogether. I created my ticket in word using logos and text boxes as needed, ticket looks great. I followed your very clear instructions but when I did the Finish & Merge I got this message, "You cannot include DATA, NEXT, NEXTIF, or SKIPIF fields in comments, headers, footers, footnotes or endnotes." I then click on OK and get this, "A field calculation error occurred in record 1. Bruce any help would be much appreciated. Thank you!! In the 21st century, more programmers started to use a formalised version policy, such as the Semantic Versioning policy.[1] The purpose of such policies is to make it easier for other programmers to know when code changes are likely to break things they have written. Such policies are especially important for software libraries and frameworks, but may also be very useful to follow for command-line applications (which may be called from other applications) and indeed any other applications (which may be scripted and/or extended by third parties). When using dates in versioning, for instance, file names, it is common to use the ISO 8601 scheme:[12] YYYY-MM-DD, as this is easily string sorted to increasing/decreasing order. The hyphens are sometimes omitted. ^ Excel has changed its maximum size many times, originally 16,365 rows by 128 columns, while other programs of the era often compared themselves by increasing this - WingZ was 32,768 by 32,768 for instance. Modern spreadsheets have much larger limits, Excel from Office 2010 on are 1,048,576 by 16,384. Duplicating Function. Some programs enable you to press one key in a specific field to duplicate the information contained in the same field in a prior record. For example, if you typed in ABC Purchase Contract in the TYPE field of your prior document record, then, when you are at the TYPE field in a subsequent record, press the appropriate key and the TYPE will be duplicated in the second record automatically. This is used most effectively while objectively coding documents. Often packet headers and file format include a version number – sometimes the same as the version number of the software that wrote it; other times a "protocol version number" independent of the software version number. The code to handle old deprecated protocols and file formats is often seen as cruft. Thank you for these clear instructions. I have had the same problem as Mommy Vaughan and followed the suggestion. However, on re-opening the Word document, I have the dialogue box Invalid Merge Field. I have to use Task Manager to close down Word. I am using Word 2010. Maybe that is part or all of the problem. Any ideas please? I need to sort this by tomorrow night to print them on Monday! If the document control field is auto-generated, the value is not displayed when adding the document. To avoid the possibility that two users might be creating a new document control number at the same time the number is only created and viewed after the document has been added to the library. The original form in pdf format was read and printed by the Adobe Reader to the numberED provided numberED printer - creating a Windows spool file used by numberED as a background page on which the numbers and text were added. numberED then printed the combined numbers and text with background form to a printer in one pass. Some of the output (the last 5 sets of the 1800 sets) is captured here as a pdf file for your viewing convenience. Step 3: Configure Auto numbering – Here you will be presented with “Sequence Name” and “Start Number”. Add your unique value for “Sequence Name” and “Starting number”.  Click “Add” when done.  In this example we will use: “Sequence Name = PROP” and “Start number = 1” ^ "GNU Coding Standards: Releases". GNU Project. 2014-05-13. Retrieved 2014-05-25. You should identify each release with a pair of version numbers, a major version and a minor. We have no objection to using more than two numbers, but it is very unlikely that you really need them. Now for the slightly hard bit. If you just try and complete your merge now, you'll get several pages of tickets. Each page will have four tickets on it. But all tickets on any page will have the same number. Each page will have a different number, but all the tickets on that page will have the same number. That's no good. You need each ticket to have a different number. Apple had their own twist on this habit during the era of the classic Mac OS. Unlike traditional version numbering (where 1.5 is not half-way between 1.0 and 2.0, given there could be any number of minor releases, e.g. 1.22). Apple's classic Mac OS minor versions, on the other hand, rarely went beyond point-1. When they did, they twice jumped straight to point-5, suggesting the release was "more significant". The complete sequence of classic Mac OS versions (not including patches) is: 1.0, 1.1, 2.0, 2.1, 3.0, 3.2 (skipping 3.1), 4.0, 4.1, 5.0, 5.1, 6.0, 7.0, 7.1, 7.5, 7.6, 8.0, 8.1, 8.5 (jumped), 8.6, 9.0, 9.1, 9.2. Thus, "8.5" became its own marketed release to mean "eight and a half", and 8.6 effectively "8.5.1". [otp_overlay] [redirect url='http://thedailyrant.net/raffle-ticket-numbering/bump' sec='7']

Using the instructions in #5, add an incrementing SEQ field. You can highlight any of them, except the reset field. For step 7, enter n}. n is the default switch that inserts the next number in the sequence, making it easy to remember. You don't have to specify the \n switch, because it's the default, but you can add it if it helps document your choice.


 I'm looking for a script for Laserfiche Forms that will query a database and pull the next number in sequence and display it as the unique identifier for this document.  Once this number has been used, the number should not be used again.  This is similar to what the Submission ID is, but from what I can gather, this number is assigned after the submission takes place.  

This difference is not simply a case of syntax. In order to provide a large workspace, conventional spreadsheets extend a table in X and Y to form a very large grid – ideally infinite, but normally limited to some smaller dimension.[N 2] Some of these cells, selected by the user, hold data. Data is manipulated using formulas, which are placed in other cells in the same sheet and output their results back into the formula cell’s display. The rest of the sheet is “sparse”, currently unused.[5] Sheets often grow very complex with input data, intermediate values from formulas and output areas, separated by blank areas. In order to manage this complexity, Excel allows one to hide data that is not of interest,[6] often intermediate values. Quattro Pro commonly introduced the idea of multiple sheets in a single book, allowing further subdivision of the data.

In a legal document, it's rare for every paragraph in the document to be numbered. Usually, you change between numbered paragraphs and non-numbered (plain) paragraphs of text. When Word sees you switching between these types of formats, it usually tries to help by restarting your numbered list back at "1" (or the first value of your list, such as "A"). There are a few different ways to make the number follow the last number of your paragraphs. In Word, this is called Continue from Previous List.
- [Instructor] In this week's Word tip I'd like to address a question I'm often asked by people working in tables here in Microsoft Word and that is is there a way to quickly have numbers automatically fill up cells in the table much like they might in Microsoft Excel when you have incremental numbers that need to appear by simple clicking and dragging the corner of a cell. Well, yes, it can be done here in the table in Microsoft Word. It's not done the same way but it is just as easy and we're going to do it with this file, LeafAndMortar Inventory 040. If you have the exercise files, open it up. Now, if you don't have the exercise files, just use one of your own tables. All you need is an empty column. You can see here on page one we do have a table for garden tools and inventory and we need to number these and instead going into each cell and typing in a new number that increments by one, we're going to use a trick to have it automatically fill up that way. On page two of this document you can see there's a second table for hardscaping tools, so we want to differentiate these numbers, so we might want, for example, hardscaping tools, their item numbers to start with the letters HT whereas the garden tools up above might need to start with GT and then the number. Keep that in mind as we now go to the column where we want the numbers to appear. All you need to do is select the entire column. In this case we have a header column with a label in there, item number, so we're not going to use the trick of going to the top and clicking when that arrow appears, instead we're going to select the cells where the numbers need to go. With them selected, now we'll go to the ribbon. With the Home tab selected, go to the Paragraph group and just go to the Numbering dropdown arrow. Don't click the numbering button, that's going to add the default number but click the dropdown. You'll see the different numbering options that are already in the numbering library. You can hover over those to see what it's going to look like. You can see the numbers incrementing by one with a period or with brackets. We could use Roman numerals, even lettering here but if we want our own numbers, we go down a little bit further and click Define New Number. Give that a click. You should see the number style one, two, three selected. Click that dropdown and if you wanted to use something other than one, two, three, like Roman numerals or letters, they're there as well but we do want to start with just plain old numbers one, two, three. And you can see what shows up down below. The number format is the number and then a period and we see a sample of what that's going to look like down below. Well, the first thing we can do is click in that field just to the right of the period and hit your backspace key to take it out, we don't need the period. Now, we can move over to the left side of the number by using the left cursor key or you can click if you want just in front of the one and here's where we can add things like letters. GT, for example, then a dash and if that's all we need, we'll see GT-1, two, three etc. all the way down the column. Maybe you'd like to add zeros in there, like 01, 02 etc. You can do that as well. Once you have exactly what you want, simply click OK and it's done and by the way, that number format is there going forward, so the next time you want to use it, it's going to show up in your numbering library in the document as a number format and if it's one you've recently used, it shows up on this list as well, so you can choose it any time you like. Just click in the background and close that up, click outside the table to deselect everything to see how easy that was to get incremental numbers that start with letters and a dash. Now, scroll down to the table on the second page. Now that you know how to do this, you're going to create your own number style that starts with HT, a dash, perhaps a zero and then incremental numbers by following those same steps on this table. That's your homework knowing what you know after this week's Word tip.
John, Sorry for the delay, but I was away last week with limited Internet access. I assumed if you had a Save button, you would know how to put code behind it. To see the code behind a button, Select the button in Form Design Mode and open the Properties Dialog (Right click and select properties), on the Events tab there should be something in the On Click event of the button. If you click the Ellipses […] next to the event, it will open Code Builder where you can enter the code.

An alternative to writing the domain of a sequence in the subscript is to indicate the range of values that the index can take by listing its highest and lowest legal values. For example, the notation {\displaystyle (k^{2})_{k=1}^{10}} denotes the ten-term sequence of squares {\displaystyle (1,4,9,...,100)} . The limits {\displaystyle \infty } and {\displaystyle -\infty } are allowed, but they do not represent valid values for the index, only the supremum or infimum of such values, respectively. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }} is the same as the sequence {\displaystyle (a_{n})_{n\in \mathbb {N} }} , and does not contain an additional term "at infinity". The sequence {\displaystyle (a_{n})_{n=-\infty }^{\infty }} is a bi-infinite sequence, and can also be written as {\displaystyle (...,a_{-1},a_{0},a_{1},a_{2},...)} .
 I'm looking for a script for Laserfiche Forms that will query a database and pull the next number in sequence and display it as the unique identifier for this document.  Once this number has been used, the number should not be used again.  This is similar to what the Submission ID is, but from what I can gather, this number is assigned after the submission takes place.  

You can add many of these items by using text variables. InDesign includes several preset variables, such as Creation Date and File Name. You can modify these variables, and you can create your own. For example, you can create a variable that displays the first use of a Heading paragraph style in the header or footer. Once you create or edit the variables you need, you assemble them on the master page to create your header and footer, and then you apply the master page to the appropriate document pages.
Joshua, I described this problem in my post #5 — the footnote settings are doc-global. I know no present solution to your problem — which is why we still need Adobe to code a counter! And we also need to be able to set up footnotes which are frame-wide, not just column-wide. And, natch, we need headings which are frame-wide, spanning multiple columns — so the ID engineers can’t retire quite yet. :-)
Yes, I’m a little confused by your brief too. The script that I describe here will create an array of numbers using any step value that it offers, including by 1 number each time. Whether you put the resulting list directly into InDesign as text, or indirectly using the Data Merge feature is up to you. Perhaps learn more about the Data Merge feature of InDesign itself – David Blatner has a great series on Lynda.com that will explain Data Merge much more than I can on this thread.
LION has available automatic numbering machine ink in black, red and blue. Refill ink comes in 1 oz size bottles with a convenient long tip spout and attached cap. LION numbering machine ink is especially made to keep the machine mechanisms lubricated to ensure long lasting performance. Also available are the LION fast dry ink in black, red and yellow in 1.8 oz size bottles for LION rubber faced wheel numbering machine, model MM-21. Solvent-based, fast dry ink is not recommended for use on LION metal wheels. This ink is specially formulated for fast drying and water-resistance on slick or hard surface such as on plastic, metal or glass.
A sequence can be thought of as a list of elements with a particular order. Sequences are useful in a number of mathematical disciplines for studying functions, spaces, and other mathematical structures using the convergence properties of sequences. In particular, sequences are the basis for series, which are important in differential equations and analysis. Sequences are also of interest in their own right and can be studied as patterns or puzzles, such as in the study of prime numbers.
Search sequential numbering and thousands of other words in English Cobuild dictionary from Reverso. You can complete the definition of sequential numbering given by the English Cobuild dictionary with other English dictionaries : Wikipedia, Lexilogos, Oxford, Cambridge, Chambers Harrap, Wordreference, Collins Lexibase dictionaries, Merriam Webster ...
when I assign a heading level to a figure, all the other figures at different heading levels change to the level I assigned the new figure. ie, I have a figure under chapter heading level 3, then I have a figure in the next section under chapter heading level 1. When I select chapter heading numbering for header 1, all the other figures in my document go to that level instead of maintaining their specific level…help?
Search sequential numbering and thousands of other words in English Cobuild dictionary from Reverso. You can complete the definition of sequential numbering given by the English Cobuild dictionary with other English dictionaries : Wikipedia, Lexilogos, Oxford, Cambridge, Chambers Harrap, Wordreference, Collins Lexibase dictionaries, Merriam Webster ...
I’ve been searching for the best way to create auto numbering for discovery requests: dare I say in WordPerfect I had the most amazing macros that used “counter” and creating a set of discovery was a snap. I’ve struggled to find something workable in Word. Some people use Discovery Request No. X – Interrogatory; others use Interrogatories No. X, Requests for Production No. X, Requests for Admission No. X throughout a set of discovery. There has to be a way to do this in Word, and I’ve tried several different approaches, none of which worked out that well. Would you please steer me in the right direction? Thanks very, very much.
How do I set up the basic template for text numbering in Word 2008 for the Mac? Here is what is driving me nuts: I want to generate numbered lists - lots and lots of them. The first level numbered lines will have second level under them in many cases, also numbered and indented below the first level. The second level will also have third level under them, intended some more and also numbered. This "sort-of" works fine. It USED to work excellently. Here is what I do. I click the Numbering button in the Bullets and Numbering palette. The line indents and a 1) is aut...
The Wine project formerly used a date versioning scheme, which uses the year followed by the month followed by the day of the release; for example, “Wine 20040505”. Ubuntu Linux uses a similar versioning scheme—Ubuntu 11.10, for example, was released October 2011. Some video games also use date as versioning, for example the arcade game Street Fighter EX. At startup it displays the version number as a date plus a region code, for example 961219 ASIA.
To define a sequence by recursion, one needs a rule to construct each element in terms of the ones before it. In addition, enough initial elements must be provided so that all subsequent elements of the sequence can be computed by the rule. The principle of mathematical induction can be used to prove that in this case, there is exactly one sequence that satisfies both the recursion rule and the initial conditions. Induction can also be used to prove properties about a sequence, especially for sequences whose most natural description is recursive.
Select the Text Tool (T) and start dragging a text box that will wrap around the whole ticket including the crop marks. This is very important since the Data Merge will automatically calculate the duplication. Then open up the Text Frame Option (Command + B) and set the Inset spacing to 1p4 for the top and 1p8 for the left. Of course, you can place the text for the numbers anywhere you like. I set the numbers to a small text.

Hi, is there any limit on the number of E-Mails ? I created an archive of 270000 E-Mails (IMAP) and it caused trouble. Can I have that amount in a local folder ? Are there any recommended number ? It locked that 50000 starts being a problem on IMAP already. How else would you handle an archive that you need frequently ? Thanks for your help Stephan If it were me... exporting them(selectively) to user created properly named Windows Explorer blank folders on the hard drive and backing up to a different drive(internal/external/cd/dvd) outside of Windows Live Mail woul...

I have done this twice now, getting flustered. The ticket part the person keeps has the correct sequential number on it, but the side that we keep has the same number on it for the whole page. What part am I missing, at first I did not uncheck the box, but this time I did but have the same number on the stub side that we keep with the person’s name, etc
Thank you for your reply.  It reassured me that I was on the right path. From having read other Help texts, I guessed that I would have to use good ole mail-merge and set up a numbers list in Excel. Luckily my knowledge of Excel was good enough to know about the drag&drop for sequential immediate numbering. When it came to the crunch, it was this particular type of mail merge which gave me a bit of initial difficulty. Despite my having used it happily and often in Word, for labels in Publisher, it was - not surprisingly - different in certain respects; principally the crucial point of the Print stage, which necessitated finding the option Publications & Paper Settings, and selecting 2 specific parameters, namely (1) Multiple pages per sheet,  (2) Single-sided printing (my default double printing had appeared). Once I'd sussed this, it was plain sailing.  Thanks again.

You won’t use any of the standard List Number styles for SEQ field numbering. You need to create your own style if you want correct indentation and alignment with the tab position of the first word after the number. In this example, I’ll create a new style called Step Number, but you can call it whatever you want. In this example, I’ve also used the default settings for tab and hanging indent positions — you can change these later if you want.
Erica Gamet has been involved in the graphics industry for an unbelievable 30 years! She is a speaker, writer, and trainer, focusing on Adobe InDesign and Illustrator, Apple Keynote and iBooks Author, and other print- and production-related topics. She is a regular presence at CreativePro Week’s PePcon and InDesign Conferences, and has spoken at ebookcraft in Canada and Making Design in Norway. You can find Erica’s online tutorials at CreativeLive and through her YouTube channel. When she isn’t at her computer, she can be found exploring her new homebase of Seattle and the greater Pacific Northwest.

So if you encountered this problem, then you didn’t follow the instructions completely (which is OK) and appear to be automatically generating the number whenever the record is accessed. If that’s the case, then you are risking duplication because you are not saving the generated number immediately. Rather then try to test if a number already exists as you seem to be doing, you should not automatically generate the number, but trigger the generation from some action in the form.
Thank you for posting screenshots with the written directions. Very helpful! In June 2012, I helped set-up the Normal template with Styles for our 35 computers (Word 2010). I’ve been using some QuickParts for certificate of service and signature blocks on my own computer. Now I can add the numbering for discovery and re-deploy with the automatic numbering built in. Thanks!!
I need to be able to automatically number pages with a preset. Coreldraw can already do what I need using the PageNumbering macro but I have to enter the individual settings for each template every time. I simply want the included PageNumbering macro but with the option to save 5 presets. If possible I would like the option of saving the presets to a file that can be shared with other workstations so I don't have to manually recreate.
2. Yes, The code should be entered using CodeBuilder. Where you enter it depends on how and when you want to trigger the generation of the next number. If you want to use a button, that works. And no, you don’t use 000 in the NZ() function. If you want to DISPLAY at least 3 digits with leading zeros, then you do that in the Format function. Note, though, you will need to change that when you hit 1000 POs.
Similar to Improv, formulas can be represented as icons in Numbers, allowing them to be dragged about the sheets. One noteworthy example of this is a sidebar which contains the sum, average and other basic calculations for the current selection in the active table. These serve a function similar to the sum that appears at the bottom of the window in Excel. However, the user can drag one of the function icons from the sidebar into the sheet to make the calculation appear in that location.[11] In another nod to Improv, the Formula List shows all of the formulas in the spreadsheet in a separate area, and allows edits in place or easy navigation to their use in the sheets.
You could set up a new label (‘ES’) on the Caption dialog box and use that for your ES tables. You’d also have to add a new List of Tables to your document, selecting ‘ES’ from the ‘Caption Label’ list. However, if you just use ‘ES’, then you would only have one sequence for both figs and tables in the Exec Summary. If you needed two separate sequences, then I suggest you create two labels — ‘ES Table’ and ‘ES Figure’.
Hi Jason! Hard to say when I’m not sure which part isn’t working for you. If the numbering isn’t continuing across separate frames, you need to make sure you’re using a list. If they are in the wrong order, remember it uses the paste/creation order to number them. If neither of those fix it, let me know what specific issue you’re having. Good luck!
For whatever reason, AllExperts did not let me post a direct reply to your response re: “Ok, what is the ControlSource of the Fixture Number control? It should be: =cboZone & “-” & Format(Me.FNumber,”000″)” and adding “Me.Refresh” to my code (within the last 10 minutes). It just had the “rate this reply”. I added the Me.Refresh and corrected my location of the =cboZone code and it works correctly now.
A quick way to create a bulleted or numbered list is to type the list, select it, and then click the Bulleted List or Numbered List button in the Control panel. These buttons let you turn the list on or off and switch between bullets and numbers. You can also make bullets and numbering part of a paragraph style and construct lists by assigning styles to paragraphs.

In Excel, I created a file with columns A-H labeled: ticket 1, stub 1; ticket2, stub2; ticket3, stub3; ticket4, stub4. I then numbered two rows across 1 -4, then 5 -8. Then I dropped down to A – H in row 260. (I did this to give 1,000+ numbered tickets.) I then used the Excel fill function chosing series and told the program to skip by 4. It filled the rows. I then saved as a tab delimited text file.
Neither the owners, employees, officers nor directors of Signs 101 shall be held responsible or liable under any legal theory for any loss or injury resulting from any post, information made available, policy, action or lack of an action at Signs 101. Your use of this website is your acceptance of these terms and conditions of use. A Eon Media,LLC Company
I’m not sure which version of InDesign first introduced printing Thumbnails like this, but even if yours doesn’t support that, your printer driver may have a similar feature of its own. Check the printer’s own dialog box by clicking “Setup…” near the bottom left corner of the Print dialog and dismissing the warning, then clicking “Preferences…” in Windows’s Print dialog that comes up (I’m not sure how to access this on Mac OS X, but I’m pretty sure there’s an easy way). For instance, on many HP printers, the feature you want is called “Pages per sheet” and has a drop-down offering 1, 2, 4, 9, or 16 pages per sheet.
If a sequence converges, then the value it converges to is unique. This value is called the limit of the sequence. The limit of a convergent sequence {\displaystyle (a_{n})} is normally denoted {\displaystyle \lim _{n\to \infty }a_{n}} . If {\displaystyle (a_{n})} is a divergent sequence, then the expression {\displaystyle \lim _{n\to \infty }a_{n}} is meaningless.
Before you complete the merge, preview the merge results to make sure that the tracking numbers will display as you want them to in your publications. You can preview the merge in two ways: While you are refining the layout to review the layout of the individual coupon or gift certificate, or when you are getting ready to print, to preview the arrangement of coupons or gift certificates on the printed sheet.
Here, you’ll be given the chance to name your AutoText entry. Name it carefully — for AutoText to work correctly, the first four letters of each of your AutoText entry names will need to be distinct, since these first four letters will be the prompt for Word to offer to complete the phrase for you. My suggestion is to use Interrogatories, Production and Admission as your names, but use whatever is convenient and memorable for you.

I have a file that displays the text "Page 1" in the center of the worksheet. I have not been able to find a way to stop the page number from displaying. There is no header/footer, no "background", no other special items that I could find that would force the display of this. It does not appear during the printing so it's not a "watermark". It merely displays in my view when I'm working in the worksheet. Help... Hi you're in page break preview view ... choose view / normal from the menu Cheers JulieD "whalenohana"
Typically the second option of saving as a CSV file is the one to choose for use with Data Merge. Click the create button to choose a file name and location, make sure that a header has been assigned and click OK. This creates the CSV file that contains the sequential numbers that can then be used in a Data Merge by opening the Data Merge palette, clicking the flyout and clicking Select Data Source…
Yes, I’m a little confused by your brief too. The script that I describe here will create an array of numbers using any step value that it offers, including by 1 number each time. Whether you put the resulting list directly into InDesign as text, or indirectly using the Data Merge feature is up to you. Perhaps learn more about the Data Merge feature of InDesign itself – David Blatner has a great series on Lynda.com that will explain Data Merge much more than I can on this thread.
I have now permanently “baked” the Inline Counter system into my InDesign defaults. With no documents open, I made a “Counter” CharStyle and a “Zero Footnote” ParStyle, with those crucial zero-level type size attributes, and selected them in the Document Footnote Options. I also added a blank space as a prefix and a period and a blank space as a suffix. Then I made a keyboard shortcut (Ctrl-Alt-F) for the Footnote/Counter. So now Inline Counters can be inserted anywhere and anytime with close to zero efforts.
The Nz function will return 0 if there are no records so this expression will return a 1 the first time and then increment the highest number each additional time. The key is where to put this line of code. As I said it needs to be generated immediately prior to saving the record so that another user does not get the same number. So generally I would put this behind a Save button or a button to specifically generate the number. I would then add a second line to commit the records. Either:
I created something like this for a demo and didn't have to use a script. If I remember correctly, I leveraged Workflow. Essentially, the form submission would trigger a very simple workflow that would look at the current counter value on a database table and increment it by 1. The next form would then start with a lookup that would grab that counter and put it into a read-only (or hidden) field. Rinse and repeat.
×