To use mail merge to create a batch of gift certificates or coupons with tracking numbers, you need to set up a data source that contains a column listing the tracking numbers. If you plan to add only the tracking numbers to your publications, create a data source for the tracking numbers. If you also plan to use mail merge to insert additional information into your publications, such as customer names or addresses, you can add the column of tracking numbers to a data source that also lists the name and address data that you want to use.


NCR (no carbon required) or carbonless forms, like the name suggests, have eliminated the need for carbon paper between sheets to create multiple copies of the same form. The paper is chemically treated to transfer the impression from the first page to the subsequent pages with very little pressure. This works because the bottom side of carbonless NCR paper is coated with micro-encapsulated dye that breaks when pressed. The top of the susequent sheet is coated with clay that reacts with the dye to form a permanent mark. When the top sheet is written on, the pressure causes the micro-capsules to break and release the dye onto the page beneath it.
So, as an example, I’ll start with the style linked to the interrogatory in my multi-level list, type my question, hit return and I’ve got the answer space. Return again, another interrogatory ready to go. Wanted request for production instead of interrogatory? Hit the tab key and it switches to the next list level, which is request for production. (I hope I’ve explained this well enough.)
I’ve been searching for the best way to create auto numbering for discovery requests: dare I say in WordPerfect I had the most amazing macros that used “counter” and creating a set of discovery was a snap. I’ve struggled to find something workable in Word. Some people use Discovery Request No. X – Interrogatory; others use Interrogatories No. X, Requests for Production No. X, Requests for Admission No. X throughout a set of discovery. There has to be a way to do this in Word, and I’ve tried several different approaches, none of which worked out that well. Would you please steer me in the right direction? Thanks very, very much.
Moreover, the subscripts and superscripts could have been left off in the third, fourth, and fifth notations, if the indexing set was understood to be the natural numbers. Note that in the second and third bullets, there is a well-defined sequence {\displaystyle (a_{k})_{k=1}^{\infty }} , but it is not the same as the sequence denoted by the expression.

I haven’t tried this… But according to the Microsoft instructions about field switches (http://office.microsoft.com/en-us/word-help/insert-and-format-field-codes-HA010338798.aspx), you can add text to a field code. The text must be in single quote marks, and displays as a constant for the field. The examples on that web page show the text at the end of the field, but you could try it earlier in the field by testing putting ‘120/’ in front of where the SEQ number will go.
Note that the list name remains the same for all of these tags. Table titles have a level 4 designation, and Figure titles have a level 5. The numbering style calls out the level 4 numbers (^4) on the Table titles, and the level 5 numbers (^5) for the Figure titles. It’s important to note that for this style, both of these restart after the level 3s (Subhead 2s).
Thanks very much for your prompt reply, which reassured me that I was on the right path. From having read various Help topics, I suspected that I'd have to use an Excel data source for the numbers. Fortunately, my knowledge of Excel was good enough to know about the drag and drop facility to create automatic sequential numbering, so the data source creation was easy. In the end, it was the mail merge (no surprises?) which proved a tad tricky, but I got there in the end. I've used MM many times and quite happily in Word documents, but for Publisher label format, it was of course a bit different. The important bit that I had to discover for myself was the significance of, after getting to the Print stage, going into Print options, to Publication & Paper Settings, and selecting Multiple Pages per Sheet (& in my case, also "Single-sided" cos my default of duplex printing had come up). But TA-DA!  All is fine now. Thanks very much again.

There are a number of ways to denote a sequence, some of which are more useful for specific types of sequences. One way to specify a sequence is to list the elements. For example, the first four odd numbers form the sequence (1, 3, 5, 7). This notation can be used for infinite sequences as well. For instance, the infinite sequence of positive odd integers can be written (1, 3, 5, 7, ...). Listing is most useful for infinite sequences with a pattern that can be easily discerned from the first few elements. Other ways to denote a sequence are discussed after the examples.


A sequence is said to be monotonically increasing, if each term is greater than or equal to the one before it. For example, the sequence {\displaystyle (a_{n})_{n=1}^{\infty }} is monotonically increasing if and only if an+1 {\displaystyle \geq } an for all n ∈ N. If each consecutive term is strictly greater than (>) the previous term then the sequence is called strictly monotonically increasing. A sequence is monotonically decreasing, if each consecutive term is less than or equal to the previous one, and strictly monotonically decreasing, if each is strictly less than the previous. If a sequence is either increasing or decreasing it is called a monotone sequence. This is a special case of the more general notion of a monotonic function.
A multi-level list is a list that describes hierarchical relationships between the list paragraphs. These lists are also called outline lists because they resemble outlines. The list’s numbering scheme (as well as indentations) show rank as well as how items are subordinate to one another. You can tell where each paragraph fits in the list with respect to the paragraphs before and after it. You can include up to nine levels in a multi-level list.
This difference is not simply a case of syntax. In order to provide a large workspace, conventional spreadsheets extend a table in X and Y to form a very large grid – ideally infinite, but normally limited to some smaller dimension.[N 2] Some of these cells, selected by the user, hold data. Data is manipulated using formulas, which are placed in other cells in the same sheet and output their results back into the formula cell’s display. The rest of the sheet is “sparse”, currently unused.[5] Sheets often grow very complex with input data, intermediate values from formulas and output areas, separated by blank areas. In order to manage this complexity, Excel allows one to hide data that is not of interest,[6] often intermediate values. Quattro Pro commonly introduced the idea of multiple sheets in a single book, allowing further subdivision of the data.
GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.
Scott, you’ll need to be more specific to help me. When you say “put this code behind a save button” what exactly does that mean – where do I type the code you provided? Yes, I do have a Save Button, which saves the record and closes the form (but currently has no way to save the next sequential Project ID). I want show this next Project ID (number on the entry form) and have that new number flow to the table along with the other data on the form.

Step 2: Create a new doc for your numbers. Using Paragraph/Bullets and Numbering choose Numbering and set the Format to the 4 digits you've indicated in your sample. In the box below Format, remove the ".^t". This will remove the period & tab after the style. With that style set, hit return to create a number. Repeat for as many numbers of coupons you'll have. You can create 10 and copy & paste for however many numbers you need. You could possibly create your numbers in Xcel, but I'm instructing in ID only.
While InDesign veterans may assume everyone already knows this, I can assure you I have worked with very sophisticated documents from designers who did not take advantage of this basic feature. A good rule of thumb to keep in mind as you tackle InDesign challenges is this: If it’s repetitious, tedious, or time-consuming, there’s probably a built-in solution right there in the program. You just need to go look for it.
I’d like to share my solution. It came to me partially in my sleep, I tried refining it this morning but because of time, finally had my production person print the manually numbered tickets so that we could deliver them to the customer who needed them today. Here is my solution. I deduced that it would be better to let a program designed to count, do the counting. I used Excel. I then let InDesign CS4 do the merging. Here’s the formula.
when I assign a heading level to a figure, all the other figures at different heading levels change to the level I assigned the new figure. ie, I have a figure under chapter heading level 3, then I have a figure in the next section under chapter heading level 1. When I select chapter heading numbering for header 1, all the other figures in my document go to that level instead of maintaining their specific level…help?
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
I’d like to use my own styles for headings in my Word document. Let’s say- style hdn1 instead of Heading1, and hdn2 instead of Heading2. I know how to create new multilevel list for heading numbers, linking levels to my own styles hdn1, hdn2…. (By the way- why multilevel lists are not accessible for styles formatting through Modify-Format-Numbering like it was in Word2003?)
Other examples of sequences include ones made up of rational numbers, real numbers, and complex numbers. The sequence (.9, .99, .999, .9999, ...) approaches the number 1. In fact, every real number can be written as the limit of a sequence of rational numbers, e.g. via its decimal expansion. For instance, π is the limit of the sequence (3, 3.1, 3.14, 3.141, 3.1415, ...). A related sequence is the sequence of decimal digits of π, i.e. (3, 1, 4, 1, 5, 9, ...). This sequence does not have any pattern that is easily discernible by eye, unlike the preceding sequence, which is increasing.
Hi, is there any limit on the number of E-Mails ? I created an archive of 270000 E-Mails (IMAP) and it caused trouble. Can I have that amount in a local folder ? Are there any recommended number ? It locked that 50000 starts being a problem on IMAP already. How else would you handle an archive that you need frequently ? Thanks for your help Stephan If it were me... exporting them(selectively) to user created properly named Windows Explorer blank folders on the hard drive and backing up to a different drive(internal/external/cd/dvd) outside of Windows Live Mail woul...
This chapter (web page) takes you through how numbering is supposed to work in Word and the various controls. It is useful, but primarily on SEQ fields and simple numbered lists and also as reference showing the menus, dialogs and controls and going through the concepts for outline numbering. To actually set up outline numbering that works, refer to the Kelly and McGhie articles.

I removed the required setting on the table level. The form does not give me an error message now, but does not close on its on. I closed it via a command then looked at the Design Projects table to see if the new record, #896, shows up. A new record is there, with all the entered data EXCEPT the very important field of the Project ID. That field is blank.


OK I found the ControlSource property but it is on the Job No text box, do I enter the code there or am I entering my code on the button I created to save and get new number? If I put it behind the button, when I open the form it goes to the first record so I go to the last record and hit save get new number button and it gives me the number 1……Is it because when I open the form it goes to the first record and not a new record????
Both the Collection Point ID and Artifact ID fields are bound properly and display those exact names in the property sheet under both control source and name. On the save button I have on the form, when I click on the event tab and the on click option I have event procedure and I click the […] option to open up the code builder and this is what I currently have:
For example, in our law practice, we submit briefs with hundreds of attachments. Those attachments are constantly being reorganized (thus renumbered) and we had to develop a scheme to keep each attachment (and reference to each attachment) organized and accurate. We created a master list of attachments, and captured the dynamic field code in a bookmark. We can then cross-reference to that bookmark (which will return a number) through our documents. Example Public Attachment 68 (where 68 represents a field sequence code, is captured in a bookmark we will call SR_112). The bookmark name is a code name supplied by the drafting lawyer. That way, when the lawyer refers throughout the document to Public Attachment ___, we insert a cross reference to bookmark SR_112, and it always returns an accurate number, even if we reorganize the order of our attachments.
By default, bullets and numbers inherit some of their text formatting from the first character in the paragraph to which they’re attached. If the first character in one paragraph is different from the first characters in other paragraphs, the numbering or bullet character may appear inconsistent with the other list items. If this is not the formatting you desire, create a character style for numbers or bullets and apply it to your list by using the Bullets And Numbering dialog box.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
Ok I guess it is better for me to explain what I am doing. I am in the process of creating an Access Database that an individual has been using an Excel spreadsheet forever and a day. Well the individual has on occasion doubled up numbers, forgot numbers, etc. So on what I have learned from different Access courses and Google searches I am trying to apply my knowledge.
i have gone through the intersting discussions on this site. I am having a problem with foot notes in Adobe in design cs 4. when i pasted a fresh set of pages in a doc in- in design, the fn numbering starts from 1 all over again in the fresh set of pages. i am not able to insert foot notes manually, as it does not creat the space below the text. I am stuck for help
Can anyone tell me what the maximum no. of worksheets is in Excel? Ton From Help...Limited by available memory (default is 3) -- HTH Nick Hodge Microsoft MVP - Excel Southampton, England nick_hodgeTAKETHISOUT@zen.co.uk.ANDTHIS "Ton" wrote in message news:EB5EE739-9250-4D83-AA7C-EE82C02C0AA3@microsoft.com... > Can anyone tell me what the maximum no. of worksheets is in Excel? The maximum number only depends on the amount of memory available. -- Best Regards Leo Heuser Followup to newsgroup only please. "Ton"
Despite its difficulties and drawbacks Word's automatic numbering can be harnessed. The best method I have seen for doing that is with outline numbering as explained by MVP Shauna Kelly in: Outline numbering in Microsoft Word. This takes a good bit of work to get it set-up, but if you get it set up in a template it is well worth the effort and most of your automatic paragraph numbering issues will be resolved.
Note  If TAB and SHIFT+TAB do not work for changing the indents for outline numbering, you probably have the option Tabs and Backspace set left Indent turned off. To change this setting, from the Tools menu, choose Options. Select the Edit tab and check the option Tabs and backspace set left indent. As an alternative to turning this option on, you can instead use ALT+SHIFT+LEFT ARROW or RIGHT ARROW to increase or decrease outline numbering.

As more highways were built, states and countries began to experiment with distance-based (mile-based or kilometer-based) exit numbers. The first mile-based system known was implemented on the Garden State Parkway in New Jersey in the late 1950s. Michigan also implemented mile-based junction numbers on Interstate 94 in the 1960s. In this system, the number of miles from the beginning of the highway to the exit is used for the exit number. If two exits would end up with the same number, the numbers are sometimes modified slightly; this is often impossible and exits are given sequential or directional suffixes, just as with sequential numbers.
×