You may wonder whether typing 1, 2, and 3 would be easier than using the ListNum field. Although doing that may be easier initially, the value of using the ListNum field becomes apparent when you cut and paste. When a paragraph contains multiple numbered items that you move or delete, Word automatically updates the ListNum fields. Using ListNum fields assures you of accurate numbering within a paragraph throughout the document.
Version control is one of the most critical elements of a document management system because it ensure users always have access to the most current version of a company document. This feature alone can cost justify the implementation of a document management system as it eliminates duplication of work and allows users to share the most current information on matters such as company policies or contracts.
For years, I've applied an autonumbered style to the first cell I want to be sequentially numbered. When I add rows, the cells immediately below continue that same numbered style whether I add them by tabbing from the end of the last row or by using the commands to inserts rows above or below. Because the numbering is part of a style, it can continue from one table to another, but it can always be restarted. I can even skip a row by changing the style for the particular cell or by just toggling off the numbering. I also use it to show two levels of numbering in a single cell by creating two autonumbered styles in a hierarchy that works just like Heading 1 and Heading 2.
I normally use "Data Merge" in InDesign and use Excel (or something like it) to generate the list of numbers for me. You would copy the numbers into a text file so that InDesign can read them as the merge data source. Note that you would have one ticket on the page and then let InDesign set the other tickets on the page (you can tell the Data Merge control panel about spacing).
Version numbers are used in practical terms by the consumer, or client, to identify or compare their copy of the software product against another copy, such as the newest version released by the developer. For the programmer or company, versioning is often used on a revision-by-revision basis, where individual parts of the software are compared and contrasted with newer or older revisions of those same parts, often in a collaborative version control system.
As an example of surprising version number ordering implementation behavior, in Debian, leading zeroes are ignored in chunks, so that 5.0005 and 5.5 are considered as equal, and 5.5<5.0006. This can confuse users; string-matching tools may fail to find a given version number; and this can cause subtle bugs in package management if the programmers use string-indexed data structures such as version-number indexed hash tables. Once you are happy with your basic layout, copy everything three times so you have a page of four tickets. At this point, they won't be numbered tickets just yet, you will add the numbers in a moment: Manually, you can obtain what is called a Bates stamper that automatically increases the number on the stamper each time it is stamped on a document. This will assist you in not having to either write the increasing numbers on the document or manually changing a stamper each time you place a number on a document. Hello Bruce, I seem to be having a different problem altogether. I created my ticket in word using logos and text boxes as needed, ticket looks great. I followed your very clear instructions but when I did the Finish & Merge I got this message, "You cannot include DATA, NEXT, NEXTIF, or SKIPIF fields in comments, headers, footers, footnotes or endnotes." I then click on OK and get this, "A field calculation error occurred in record 1. Bruce any help would be much appreciated. Thank you!! In the 21st century, more programmers started to use a formalised version policy, such as the Semantic Versioning policy.[1] The purpose of such policies is to make it easier for other programmers to know when code changes are likely to break things they have written. Such policies are especially important for software libraries and frameworks, but may also be very useful to follow for command-line applications (which may be called from other applications) and indeed any other applications (which may be scripted and/or extended by third parties). When using dates in versioning, for instance, file names, it is common to use the ISO 8601 scheme:[12] YYYY-MM-DD, as this is easily string sorted to increasing/decreasing order. The hyphens are sometimes omitted. ^ Excel has changed its maximum size many times, originally 16,365 rows by 128 columns, while other programs of the era often compared themselves by increasing this - WingZ was 32,768 by 32,768 for instance. Modern spreadsheets have much larger limits, Excel from Office 2010 on are 1,048,576 by 16,384. Duplicating Function. Some programs enable you to press one key in a specific field to duplicate the information contained in the same field in a prior record. For example, if you typed in ABC Purchase Contract in the TYPE field of your prior document record, then, when you are at the TYPE field in a subsequent record, press the appropriate key and the TYPE will be duplicated in the second record automatically. This is used most effectively while objectively coding documents. Often packet headers and file format include a version number – sometimes the same as the version number of the software that wrote it; other times a "protocol version number" independent of the software version number. The code to handle old deprecated protocols and file formats is often seen as cruft. Thank you for these clear instructions. I have had the same problem as Mommy Vaughan and followed the suggestion. However, on re-opening the Word document, I have the dialogue box Invalid Merge Field. I have to use Task Manager to close down Word. I am using Word 2010. Maybe that is part or all of the problem. Any ideas please? I need to sort this by tomorrow night to print them on Monday! If the document control field is auto-generated, the value is not displayed when adding the document. To avoid the possibility that two users might be creating a new document control number at the same time the number is only created and viewed after the document has been added to the library. The original form in pdf format was read and printed by the Adobe Reader to the numberED provided numberED printer - creating a Windows spool file used by numberED as a background page on which the numbers and text were added. numberED then printed the combined numbers and text with background form to a printer in one pass. Some of the output (the last 5 sets of the 1800 sets) is captured here as a pdf file for your viewing convenience. Step 3: Configure Auto numbering – Here you will be presented with “Sequence Name” and “Start Number”. Add your unique value for “Sequence Name” and “Starting number”.  Click “Add” when done.  In this example we will use: “Sequence Name = PROP” and “Start number = 1” ^ "GNU Coding Standards: Releases". GNU Project. 2014-05-13. Retrieved 2014-05-25. You should identify each release with a pair of version numbers, a major version and a minor. We have no objection to using more than two numbers, but it is very unlikely that you really need them. Now for the slightly hard bit. If you just try and complete your merge now, you'll get several pages of tickets. Each page will have four tickets on it. But all tickets on any page will have the same number. Each page will have a different number, but all the tickets on that page will have the same number. That's no good. You need each ticket to have a different number. Apple had their own twist on this habit during the era of the classic Mac OS. Unlike traditional version numbering (where 1.5 is not half-way between 1.0 and 2.0, given there could be any number of minor releases, e.g. 1.22). Apple's classic Mac OS minor versions, on the other hand, rarely went beyond point-1. When they did, they twice jumped straight to point-5, suggesting the release was "more significant". The complete sequence of classic Mac OS versions (not including patches) is: 1.0, 1.1, 2.0, 2.1, 3.0, 3.2 (skipping 3.1), 4.0, 4.1, 5.0, 5.1, 6.0, 7.0, 7.1, 7.5, 7.6, 8.0, 8.1, 8.5 (jumped), 8.6, 9.0, 9.1, 9.2. Thus, "8.5" became its own marketed release to mean "eight and a half", and 8.6 effectively "8.5.1". [otp_overlay] [redirect url='http://thedailyrant.net/raffle-ticket-numbering/bump' sec='7']
Thanks for the head start on this, it got me part the way through my problem but I found that when I had 3 figures in a row then a map, the next figure would jump back to #.1 again. Because I had figures, maps and tables that needed to be numbered I used the ‘levels’ to differentiate between them as you suggested, but found if you create a new number list for each entry ie. number list for maps, and number list for tables etc then they don’t conflict. thanks for the start off though. no where else pointed it out as clearly as this. Cheers
This one is EASY. In InDesign, with a one-sided NCR form, cut the all elements from the first page. Go to your Master page and place. Where you are going to number the forms, draw a text box and insert a page number marker there. Format it to your liking, then insert as many pages as SETS are going to be made. When you go to print, enter 2 or 3 in the copies box, depending if it's 2-part or 3-part and under the properties button, select GROUPED or UNCOLLATED, turn off OFFSET. Violá!

My issue is trying to create small dot labels or equivalent to make up sequential alpha numeric labels to identify each individual item that I have in my shop, retrospectively. I have possibly 6-8thousand individual items that need coding for stock take purposes yet I can find no outlet that supply such thing. Do you have any suggestions. My line is antiques/collectables, predominantly china with items ranging in size from 2-3cm to 5/600cm. I would be most grateful for any solutions or suggestions. Best regards. Pete.
Some drawbacks to this feature are that you lose a little control when you are typing. Word formats for you and some users do not like this. Also, on certain items, you will get a number when you do not expect or need one. For example, you have an attorney whose name begins with an initial (A. George Smith). When you type the name and press ENTER, the first initial "A." converts to an automatic number.
You could set up a new label (‘ES’) on the Caption dialog box and use that for your ES tables. You’d also have to add a new List of Tables to your document, selecting ‘ES’ from the ‘Caption Label’ list. However, if you just use ‘ES’, then you would only have one sequence for both figs and tables in the Exec Summary. If you needed two separate sequences, then I suggest you create two labels — ‘ES Table’ and ‘ES Figure’.
Hi Jason! Hard to say when I’m not sure which part isn’t working for you. If the numbering isn’t continuing across separate frames, you need to make sure you’re using a list. If they are in the wrong order, remember it uses the paste/creation order to number them. If neither of those fix it, let me know what specific issue you’re having. Good luck!

I know that I can select all of the clips and then move the play head to approx 1/10 of a second and split the clips. This works except I have to go through and manually delete the bits I don't want which is tedious enough for a video with 82 images but I am planning on longer projects, doing it manually would be a nightmare. Also I could probably re-order the images manually but I am sure that there must be an easier.


To include numbering prefixes from higher levels, enter text or click at the start of the Number box and choose Insert Number Placeholder and then select a Level option (for example, Level 1), or enter ^ and then the list level (for example, enter ^1). In a list with first levels numbered 1, 2, 3, and so on, and second levels numbered a, b, c, and so on, including the first-level prefix in the second level renders second-level numbers as 1a, 1b, 1c; 2a, 2b, 2c; 3a, 3b, 3c.

- [Instructor] In this week's Word tip I'd like to address a question I'm often asked by people working in tables here in Microsoft Word and that is is there a way to quickly have numbers automatically fill up cells in the table much like they might in Microsoft Excel when you have incremental numbers that need to appear by simple clicking and dragging the corner of a cell. Well, yes, it can be done here in the table in Microsoft Word. It's not done the same way but it is just as easy and we're going to do it with this file, LeafAndMortar Inventory 040. If you have the exercise files, open it up. Now, if you don't have the exercise files, just use one of your own tables. All you need is an empty column. You can see here on page one we do have a table for garden tools and inventory and we need to number these and instead going into each cell and typing in a new number that increments by one, we're going to use a trick to have it automatically fill up that way. On page two of this document you can see there's a second table for hardscaping tools, so we want to differentiate these numbers, so we might want, for example, hardscaping tools, their item numbers to start with the letters HT whereas the garden tools up above might need to start with GT and then the number. Keep that in mind as we now go to the column where we want the numbers to appear. All you need to do is select the entire column. In this case we have a header column with a label in there, item number, so we're not going to use the trick of going to the top and clicking when that arrow appears, instead we're going to select the cells where the numbers need to go. With them selected, now we'll go to the ribbon. With the Home tab selected, go to the Paragraph group and just go to the Numbering dropdown arrow. Don't click the numbering button, that's going to add the default number but click the dropdown. You'll see the different numbering options that are already in the numbering library. You can hover over those to see what it's going to look like. You can see the numbers incrementing by one with a period or with brackets. We could use Roman numerals, even lettering here but if we want our own numbers, we go down a little bit further and click Define New Number. Give that a click. You should see the number style one, two, three selected. Click that dropdown and if you wanted to use something other than one, two, three, like Roman numerals or letters, they're there as well but we do want to start with just plain old numbers one, two, three. And you can see what shows up down below. The number format is the number and then a period and we see a sample of what that's going to look like down below. Well, the first thing we can do is click in that field just to the right of the period and hit your backspace key to take it out, we don't need the period. Now, we can move over to the left side of the number by using the left cursor key or you can click if you want just in front of the one and here's where we can add things like letters. GT, for example, then a dash and if that's all we need, we'll see GT-1, two, three etc. all the way down the column. Maybe you'd like to add zeros in there, like 01, 02 etc. You can do that as well. Once you have exactly what you want, simply click OK and it's done and by the way, that number format is there going forward, so the next time you want to use it, it's going to show up in your numbering library in the document as a number format and if it's one you've recently used, it shows up on this list as well, so you can choose it any time you like. Just click in the background and close that up, click outside the table to deselect everything to see how easy that was to get incremental numbers that start with letters and a dash. Now, scroll down to the table on the second page. Now that you know how to do this, you're going to create your own number style that starts with HT, a dash, perhaps a zero and then incremental numbers by following those same steps on this table. That's your homework knowing what you know after this week's Word tip.
2. Yes, The code should be entered using CodeBuilder. Where you enter it depends on how and when you want to trigger the generation of the next number. If you want to use a button, that works. And no, you don’t use 000 in the NZ() function. If you want to DISPLAY at least 3 digits with leading zeros, then you do that in the Format function. Note, though, you will need to change that when you hit 1000 POs.

Footnotes, after all, are always numbered sequentially and update when you add or remove one. The problem is that each time you add a footnote you get an extra space down at the bottom of the column. The solution? Make a paragraph style for your footnotes that specifies a .1 pt tall size with a 0 (zero) leading, then choose that paragraph style in the Document Footnote Options dialog box.
Hi Scott, I had a question regarding the sequential numbering Apex example…I am looking to automatically restart the sequence every month, which is not a problem using your example (i.e. changing the year to month in the expression). However, I would also like to add in a condition for year, so that the sequence restarts for each month of each year (i.e. my problem is for example that Feb 2011 last sequence number is 5, and then in Feb 2012 this becomes 6, where I would like it to be 1). I am wondering what the syntax would be. Thanks in advance, Lawn.
You’ve got some tips to help make your raffle more successful. You’ve got several free Word ticket templates to choose from. You know how to sequentially number tickets in two different ways. All that is left for you to do is go sell those tickets, have the draw, and then feel good about helping someone out. All for pennies on the dollar over ordering custom made tickets.
Michelle Castle began writing professionally in 2005. She has written technology news and tutorials for consumers, brochure and web copy for the Ehlers-Danlos National Foundation, and promotional materials for religious nonprofits including the International Pentecostal Holiness Church. Michelle has a Bachelor of Arts in English from Oklahoma State University.

OK, First, you need to reread the blog. You should NOT be storing the Transaction_ID. It is a calculated value. Second, your naming is what confused me. Your Passenger table should have an autonumber PassengerID. That PassengerID should be the Foreign Key in your Reservations table. Your servation table should also have an autonumber for ReservationID. I really don’t see why you need sequential numbering in the passenger table. I can understand it in the Reservations table, but not in the passenger table. Also, I don’t see any reason for a transaction date in the passenger table. I can understand a CreateDate for when the passenger signed up.
@Andy: I’m sorry that I sounded dismissive. That wasn’t my intent. Rather, I was just admitting that I had no idea why someone using CS3 would not see the dialog boxes as they are shown above. If you’re using CS2, they would be significantly different. But the second part of the tip (where I show the numbering dialog boxes) relies on CS3 or later. If you are using CS3 or CS4 and you don’t see that dialog box, feel free to email me at david [at] indesignsecrets [dot] com and send me a screen shot of what you are seeing.
The Wine project formerly used a date versioning scheme, which uses the year followed by the month followed by the day of the release; for example, “Wine 20040505”. Ubuntu Linux uses a similar versioning scheme—Ubuntu 11.10, for example, was released October 2011. Some video games also use date as versioning, for example the arcade game Street Fighter EX. At startup it displays the version number as a date plus a region code, for example 961219 ASIA.

LION Automatic Numbering Machines are the highest quality and the most durable stamps in the market at prices less than the competition. LION machines are precision crafted of one-piece hardened steel and finished in rugged, high-polish chrome. Ideal for sequential numbering operation to use as date and number stamp, serial number stamp, inspection stamp, etc. Customizing is also available so that it can work to your exact specifications. Made in Japan.
I have done this twice now, getting flustered. The ticket part the person keeps has the correct sequential number on it, but the side that we keep has the same number on it for the whole page. What part am I missing, at first I did not uncheck the box, but this time I did but have the same number on the stub side that we keep with the person’s name, etc

To include numbering prefixes from higher levels, enter text or click at the start of the Number box and choose Insert Number Placeholder and then select a Level option (for example, Level 1), or enter ^ and then the list level (for example, enter ^1). In a list with first levels numbered 1, 2, 3, and so on, and second levels numbered a, b, c, and so on, including the first-level prefix in the second level renders second-level numbers as 1a, 1b, 1c; 2a, 2b, 2c; 3a, 3b, 3c.


We recently had to print 500 numbered tickets 8 up on 8.5 x 11. When we took it back to Bindery they would have had to hand collate the tickets back in order after the cut. So we came up with a way that when each stack was cut they would simply be stack on top of each other. We couldn’t figure out a way to add 8 sets of grouped numbers to 8-up layout so I had to go into the txt file and number it manually. It worked fine but took a little time. Is there an option to pull 8 different sets of numbers to one page?
I need 2 copies to be printed each time I print from a certain file. Is there any way to save this command so I don't have to change the number of copies each time I print? Hi you could record a macro while doing this manually and assign a shortcut or button to this recorded macro -- Regards Frank Kabel Frankfurt, Germany Hebert45 wrote: > I need 2 copies to be printed each time I print from a certain file. > Is there any way to save this command so I don't have to change the > number of copies each time I print? ...
Bottom Line – So, is there: (1) any way to “save” “Auto Text” entries (or similar) so that several people in the office (i.e. attorney, paralegal, secretary, etc.) can “share” and have access to the same set, and thus work better as a “team”?; and (2) if/when a set of “Auto Text” entries is so saved and created, is there any way to keep it “alive” and “safe” so it “survives” the (inevitable) series of computer updates, fixes, server crashes, etc., that will happen over time in a law office (and even several times during the life a litigation case that may last two years or more in an office)?.
I have a similar question about numbering – but a bit more complicated. U want to convert the caption number sequences from a single number sequence to reflect the heading that the table/figure is sitting under. For example, if it’s sitting under heading 6.2, the first table or figure would be Table/Figure 6.2 a, then 6.2 b and so on, until after the next heading, where they would start again – 6.3 a and so on. How do I do that?!!
Is there a way to do this: I have a form called "List of Proposals Written" that is listed by th Proposal number. Is there a way to display on another excel spreadsheet, the mos current Proposal number? I know Access you use something like Dmax(ProposalID)+1 What should I do in Excel:confused: Any help would be greatly appreciated! Michae -- Message posted from http://www.ExcelForum.com "daniels012 >" < wrote > I have a form called "List of Proposals Written" that is listed by the > Propos...

Add numbers by inserting the same identifier at another location. Alternatively, copy the first one, select it and press “F9” to update the display. As a third option, you can use the keyboard shortcut “Ctrl-F9” and type “SEQ” and your identifier between the braces that appear. For instance, insert “{SEQ mynum}.” Press “F9” to update the field and enable the number to display.


Typically the second option of saving as a CSV file is the one to choose for use with Data Merge. Click the create button to choose a file name and location, make sure that a header has been assigned and click OK. This creates the CSV file that contains the sequential numbers that can then be used in a Data Merge by opening the Data Merge palette, clicking the flyout and clicking Select Data Source…


I am using Windows 10 and Lightroom Classic CC.  Unlike many professional photographers who go on very specific shoots, when I travel, especially, I am shooting a wide variety of shots and in many different places.  Thus, I find it most convenient to import my photos into Lightroom with only the most basic information -- metadata, and general keywords.  Then when I have the time, I go through and sort the photos into subfolders, give them titles and more specific keywords.  I also want to number these photos.  Often, however, I will want to add more photos to a subfolder -- say my husband's photos taken at the same place.  In Photoshop, these photos can be numbered so that the numbering sequence follows the photos in the same folder that have already been numbered.
Here is my problem. i have a series of 3 digit numbers that need to be cinverted to a series of 4 digit numbers using this following 722 needs to read as 5622 and in the next collum SV-7822 in the collum's to the right. what type of formula is this and how can i do it? The above is an example, i have a whole range of 3 digit numbers that need the exact. rules applied to all numbers. which is why i need a formula to do it. Help someone please!!!! I'm not completely clear on what your looking for but if 722 was in A1 in B1: = A1 + 4900 in B2: = ="SV-" & A1 + 7100...
All of this happens in the Bullets & Numbering dialog box, shown below. You will definitely want to use paragraph styles for this. My first one is called Chapter title. You will need to begin by changing the List Type to Numbers for all of the levels, and you must both name the List and use the same named list for all Levels. You do this by selecting the List > New List.
Version control is one of the most critical elements of a document management system because it ensure users always have access to the most current version of a company document. This feature alone can cost justify the implementation of a document management system as it eliminates duplication of work and allows users to share the most current information on matters such as company policies or contracts.
To design a certificate from scratch, you can either start with a completely blank publication or adapt an existing publication. Small-sized publication types, such as business cards, postcards, and labels can be adapted to serve as coupons. Flyers or brochures can be adapted for use as gift certificates. For more information, see Create a publication in Publisher.
Thank you for your reply.  It reassured me that I was on the right path. From having read other Help texts, I guessed that I would have to use good ole mail-merge and set up a numbers list in Excel. Luckily my knowledge of Excel was good enough to know about the drag&drop for sequential immediate numbering. When it came to the crunch, it was this particular type of mail merge which gave me a bit of initial difficulty. Despite my having used it happily and often in Word, for labels in Publisher, it was - not surprisingly - different in certain respects; principally the crucial point of the Print stage, which necessitated finding the option Publications & Paper Settings, and selecting 2 specific parameters, namely (1) Multiple pages per sheet,  (2) Single-sided printing (my default double printing had appeared). Once I'd sussed this, it was plain sailing.  Thanks again.
Standard sizes for NCR forms are half page (5.5″ x 8.5″), full page (8.5″ x 11″) and legal (8.5″ x 14″) although custom sizes can be ordered to meet your specific need. The design orientation can be either vertical or horizontal. The link below gives you access to design templates that can be used to lay out your form in the appropriate size and orientation.
I have been generating 150-400 page reports with multiple lists in tables. Word's auto numbering would only go so far in applying sequential numbering but then it just stops and I could not use it any more. I had to manually type in the numbered list which was quite annoying and very time consuming. Then I came across your Word Tip. Awesome! It worked. Thanks so very much.
The Artifact ID should NOT be your PK. There is no reason for it to be and to try and use it as such will be a headache. A primary key is simply a unique identifier for a record. Many purists will tell you that users should never see the PK and in your case, I would recommend that. Use an Autonumber as you PK and you can use that as your corresponding Foreign Key in related records. To prevent duplication you can make the combination of Collection Point ID and Artifact ID a unique, multi-field index. Then display the combination as I indicated where you need to show the user a record ID. This is all explained int he blog.

Other notations can be useful for sequences whose pattern cannot be easily guessed, or for sequences that do not have a pattern such as the digits of π. One such notation is to write down a general formula for computing the nth term as a function of n, enclose it in parentheses, and include a subscript indicating the range of values that n can take. For example, in this notation the sequence of even numbers could be written as {\displaystyle (2n)_{n\in \mathbb {N} }} . The sequence of squares could be written as {\displaystyle (n^{2})_{n\in \mathbb {N} }} . The variable n is called an index, and the set of values that it can take is called the index set.
×