Joshua, I described this problem in my post #5 — the footnote settings are doc-global. I know no present solution to your problem — which is why we still need Adobe to code a counter! And we also need to be able to set up footnotes which are frame-wide, not just column-wide. And, natch, we need headings which are frame-wide, spanning multiple columns — so the ID engineers can’t retire quite yet. :-)
There’s an old Steve Martin joke about how to make a million dollars which starts, “First, get a million dollars…” That’s the key to this trick, too: First, get a bunch of numbers. Here’s a file with 1,197 numbers in it. Now import or paste those numbers into a thread so that the numbers appear in the right place. If you need two matching numbers, just import it twice.
Thank you very much for this very useful information. May I ask how I can stop the whole document captions from being updated to the same numbering style? The problem is some of my figures are under a level 2 heading and some under a level 4 heading etc. I want to be able to have for example figure 1.1-1 as well as figure 2.3.1-1. Thank you very much.

Here is my problem. i have a series of 3 digit numbers that need to be cinverted to a series of 4 digit numbers using this following 722 needs to read as 5622 and in the next collum SV-7822 in the collum's to the right. what type of formula is this and how can i do it? The above is an example, i have a whole range of 3 digit numbers that need the exact. rules applied to all numbers. which is why i need a formula to do it. Help someone please!!!! I'm not completely clear on what your looking for but if 722 was in A1 in B1: = A1 + 4900 in B2: = ="SV-" & A1 + 7100...
Here is my problem. i have a series of 3 digit numbers that need to be cinverted to a series of 4 digit numbers using this following 722 needs to read as 5622 and in the next collum SV-7822 in the collum's to the right. what type of formula is this and how can i do it? The above is an example, i have a whole range of 3 digit numbers that need the exact. rules applied to all numbers. which is why i need a formula to do it. Help someone please!!!! I'm not completely clear on what your looking for but if 722 was in A1 in B1: = A1 + 4900 in B2: = ="SV-" & A1 + 7100...
I have screen shots of what I have in my db, where can I send it to you (it is in word format) so that you can take a look at it to see what I am doing wrong. I took a screen shot of what is listed for the button and I took a screen shot of the text box Job No. I don’t know how to bound anything other than put the code behind the button and putting the Job_No in the code as you stated. I understand what you are saying, but I thought if I put the text box name Job No in the code behind the button then it would be bound to my table with the Job No field. Heeeelllllppppp!!!! I am sorry that I can’t seem to grasp this….but appreciate all of your help!
I haven’t tried this… But according to the Microsoft instructions about field switches (http://office.microsoft.com/en-us/word-help/insert-and-format-field-codes-HA010338798.aspx), you can add text to a field code. The text must be in single quote marks, and displays as a constant for the field. The examples on that web page show the text at the end of the field, but you could try it earlier in the field by testing putting ‘120/’ in front of where the SEQ number will go.
In this system, the third number (instead of the second) denotes a minor release, and a fourth number (instead of the third) denotes bug-fix/revision releases.[23] Because the first number is always 10, and because the subsequent numbers are not decimal, but integer values, the 11th major version of OS X is labeled “10.10” (rather than 11.0). This number scheme continues above point-10, with Apple releasing macOS 10.13 in 2017.[24]
Design your ticket, use excel or libre's version and create the numbers. Save those numbers as text, I always make the first one xxx then 001 and so on, xxx will be the master page. Use data merge from Indesign to create the master ticket, you will need to make a text box for the number. Once it looks good to you draw a text box around the whole ticket. At the bottom of the data merge tab is a button that gives you the options how you want your layout, columns or rows, etc. even has a preview. once you click create it will create another file with all your tickets sequentially numbered. It'll be a couple of hours before I'm at work but can post the link I used to create these for the first couple of times.
The partial sums themselves form a sequence {\displaystyle (S_{N})_{N\in \mathbb {N} }} , which is called the sequence of partial sums of the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} . If the sequence of partial sums converges, then we say that the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} is convergent, and the limit {\displaystyle \lim _{N\to \infty }S_{N}} is called the value of the series. The same notation is used to denote a series and its value, i.e. we write {\displaystyle \sum _{n=1}^{\infty }a_{n}=\lim _{N\to \infty }S_{N}} .
	Tip  Follow the same steps (above) to create Request for Production or Request for Admissions. The only difference would be in Step 3, you would change the "rog" to "rpf" or "rfa". This will keep unique numbering schemes running in the same document. Therefore, you could have an Interrogatory No.1 as well as Request for Production No.1. Keep in mind that if you cut, copy or paste sequence codes, you'll need to select them and press F9 to update the field codes. They do not update automatically.

In the Republic of Ireland, junction numbers have existed since the opening of the first section of the M50 motorway in 1990, however due to the short length of Irish motorways until the early 2000s they were normally ignored by the general public. They are beginning to come into popular usage now, and since 2005 have been given greater prominence on road signs. With the development of the inter-urban motorway network under the National Development Plan and Transport 21, the National Roads Authority has adopted a numbering scheme for the inter-urban roads that will see Junction 1 being designated as that road's junction with the M50 in most cases. This has meant renumbering of existing junctions on some motorways, most notably the M7 motorway. Non-motorway dual carriageways forming part of major inter-urban roads also have junction numbers, however only grade-separated interchanges are numbered.


In this scenario we are assuming that there will be no more than 999 documents attached to a case. In Scenario 2 we assumed no more than 9999 inquires during a year. So you need to adjust the number of zeros when formatting Sequence for the anticipated number of records. Of course this can always be changed later. You also don’t need to format the sequence with leading zeros as the Format function does. As shown the expression returns something like: DCASD/CI123-025 for the 25th document in case CI123 for client DCASD. Without leading zeros it would be: DCASD/CI123-25. The advantage to the latter is that you don’t have to anticipate the number of records you might have in the sequence, but I’ve found many users prefer a more uniform number with the leading zeros.
Design your ticket, use excel or libre's version and create the numbers. Save those numbers as text, I always make the first one xxx then 001 and so on, xxx will be the master page. Use data merge from Indesign to create the master ticket, you will need to make a text box for the number. Once it looks good to you draw a text box around the whole ticket. At the bottom of the data merge tab is a button that gives you the options how you want your layout, columns or rows, etc. even has a preview. once you click create it will create another file with all your tickets sequentially numbered. It'll be a couple of hours before I'm at work but can post the link I used to create these for the first couple of times.
LION carries a wide range of high quality heavy-duty automatic numbering machines from the 5-wheel model to the 13-wheel model. Various specifications are available for your specific individual need. LION numbering machines are precision crafted of one-piece hardened steel frame. All metal interior construction will provide years of reliable use. This self inking numbering machine is ideal for sequential numbering operations to use as a date and number stamp, serial number stamp and inspection stamp, etc. Custom numbering machines are also available so that it can work to your exact need.
I have done this twice now, getting flustered. The ticket part the person keeps has the correct sequential number on it, but the side that we keep has the same number on it for the whole page. What part am I missing, at first I did not uncheck the box, but this time I did but have the same number on the stub side that we keep with the person’s name, etc

An exit can be numbered by where the exit in the direction of increased mileage leaves the freeway, or by where the road that the exit serves crosses the freeway (which is occasionally ambiguous). From this number, the integer exit number can be determined by rounding up, rounding down, or rounding to the nearest integer. Many jurisdictions prefer to avoid an exit 0.[citation needed] To this end, the numbers are either rounded up to get the exit number, or any exit that would get the number 0 is instead numbered 1. Examples of highways with an exit 0 are British Columbia Highway 1 on the mainland, Interstate 70 in Wheeling, West Virginia along the West Virginia–Ohio border, and Interstate 90 on the Montana side of the Idaho–Montana border.


Add specific codes to coupons to track customer responses     Use different codes for your different marketing messages, advertisements, or promotions. These codes will enable you to keep track of how customers learned about your offer. The more you learn about who is drawn to your business and what attracts customers' attention, the better you can focus future marketing efforts.
The main expressway system uses sequential numbering; Metropolitan Expressway systems also use sequential junction numbeing, usually appended with the expressway number expressed thus: 5-1; 5-2, etc. There are multiple toll expressways not operated by the major national syndicates or the Metropolitan Expressway Authorities that have no junction numbering scheme.
Angie, have tried your method; however, I encountered what I surmised was a limit on the amount of characters allowed in that “Enter formatting for number” box: for instance, I can only type as far as “Request for Productio” (excluding quotations)- additional text and codes delete and default back to the incomplete phrase “Request for Productio”. Seems to have a default of 26 characters – anything exceeding that is deleted. The phrase “Request for Admission” completes, but am unable to include anything after that phrase of 26 characters. Not sure why that is, but that’s what I run into when I attempt using the multi-list option.
You won’t use any of the standard List Number styles for SEQ field numbering. You need to create your own style if you want correct indentation and alignment with the tab position of the first word after the number. In this example, I’ll create a new style called Step Number, but you can call it whatever you want. In this example, I’ve also used the default settings for tab and hanging indent positions — you can change these later if you want.
 Does anybody have an easy way to set up sequential numbering in Coreldraw? Our shop has to lay out unit number plaques for vinyl cutting and sometimes my employee has to manually type in hundreds of numbers. I've read all the print merge suggestions for raffle tickets and such but I need the numbers entered into an object and not during the print process. 
GREAT tip with lots of uses! Thank you. This will save me hours of work on some tickets I’m designing. However, I also need to set up table tents that have numbers on them. They’re 2-up, and are folded, so each number needs to appear twice on the same page. In short, I want a page with 1/1 and 2/2, and I’m getting 1/2 and 3/4. Am I missing an obvious fix? Thank you.
I have a table named Artifact Catalog in which there is a field Collection Point ID and a field Artifact ID. On the form I have created the user will input the Collection Point ID, for example: 2-1050. I need to find a way to have this Collection Point ID automatically generate a corresponding Artifact ID, i.e when you click the save button the first record under Artifact ID becomes: 2-1050.1 and the second becomes 2-1050.2 and so on.
Gift certificates and promotional coupons can play an important role in your marketing strategy by drawing new and repeat customers to your business. However, how can you tell if they are really working to help you develop your business? To make the most of your time and your marketing budget, you need to track the success of your marketing efforts so that you can determine what marketing tactics are effective for which customers.
All I want to know is, how do you link fields, like {SEQ}, to a style – so that if I select/apply style “Figure Caption” (my style, I also have “Table Caption”), I get not just the attributes of the style (what it looks like, where it is on the page etc.) but I get a chapter (or section) number + a sequence number added, (e.g. “2-3”). I know about STYLEREF and SEQ Figure # and/or calling a section number (if required) – but I can’t find out how to take the simple and to me obvious step to have sequential numbering (prefixed with either “Figure” or “Table”) attached to my Figure Caption style. It all seems to be a two-step process: (i) select the style, (ii) select the numbering. I want to do both at style level. I want to see/get (e.g.) “Figure 2-3: Linking figure numbering to styles” just by applying my “Figure Caption” style to my figure caption text “Linking figure numbering to styles”. Please, only tell me how to do that, how to link chapter/sequence numbering via a style – i.e. in just one step – applying the style.
I like where your idea is going, but I cannot figure out how to consecutively number across text frames on one document. So far I have created a csv document in Excel, drew a textbox, imported the csv file into the Data Merge window and dragged it into the text frame. Now, I've got "<<00001>>" in the text frame. When I click "Create Merged Document" I get an error message: "Cannot creat merged document because no placeholders are present..." Now what?
Add specific codes to coupons to track customer responses     Use different codes for your different marketing messages, advertisements, or promotions. These codes will enable you to keep track of how customers learned about your offer. The more you learn about who is drawn to your business and what attracts customers' attention, the better you can focus future marketing efforts.
I have been generating 150-400 page reports with multiple lists in tables. Word's auto numbering would only go so far in applying sequential numbering but then it just stops and I could not use it any more. I had to manually type in the numbered list which was quite annoying and very time consuming. Then I came across your Word Tip. Awesome! It worked. Thanks so very much.

It sure is possible! Numbering and Section options are available in the Pages Panel menu. These options allow you to define what page starts a section and how it should be numbered. Insert a Current Page Number marker (Type>Insert Special Character>Markers>Current Page Number) in a text frame on a page or master page (recommended), select the first page of your section, open the Numbering and Section Options dialog, and enter 200 in the Start Page Numbering at: field. Hope this helps!


Standard sizes for NCR forms are half page (5.5″ x 8.5″), full page (8.5″ x 11″) and legal (8.5″ x 14″) although custom sizes can be ordered to meet your specific need. The design orientation can be either vertical or horizontal. The link below gives you access to design templates that can be used to lay out your form in the appropriate size and orientation.
This is how I see it. A person (passenger) makes a reservation. If the person has never made a reservation before, then they are added to the passenger table, But it really makes no sense to assign a sequential number to the passenger. Otherwise, an entry, just needs to be made in the reservations table. The Reservation needs to include the specific train (number and date so there should be a table for train schedules so all you need is a foreign key), the passenger and date of travel. Here I can understand wanting a sequential number to show passengers booked in a day.
The partial sums themselves form a sequence {\displaystyle (S_{N})_{N\in \mathbb {N} }} , which is called the sequence of partial sums of the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} . If the sequence of partial sums converges, then we say that the series {\displaystyle \sum _{n=1}^{\infty }a_{n}} is convergent, and the limit {\displaystyle \lim _{N\to \infty }S_{N}} is called the value of the series. The same notation is used to denote a series and its value, i.e. we write {\displaystyle \sum _{n=1}^{\infty }a_{n}=\lim _{N\to \infty }S_{N}} .
Next we will look at scenario 2. The variation here is that Apex wants to start each year with anew sequence of numbers. Also, they want to include the year when displaying this number. We still use a DMax, but we need to add criteria to determine the year. So Apex needs to have a field in their table that indicates the date. Generally, such inquiries will have a date/time stamp to indicate when received or the user will input the date and time. So we will assume there is a field in record called InquiryDate. We will also add an Integer field named Sequence. On the form we will add a control bound to Sequence, but set its Visible property to No. The line of code will look like this:
That’s it! From now on, all you have to do to add SEQ field numbering is either type in your AutoCorrect text (1] and n]) or select the options from your Quick Parts list. If you find your numbering gets out of whack (remember, the numbers don’t update when you insert a new number between two existing numbers, or delete a number), select the sequence and press F9 (Hint: To update all fields for the entire document, press Ctrl+A then F9).

Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.

Infinite sequences of digits (or characters) drawn from a finite alphabet are of particular interest in theoretical computer science. They are often referred to simply as sequences or streams, as opposed to finite strings. Infinite binary sequences, for instance, are infinite sequences of bits (characters drawn from the alphabet {0, 1}). The set C = {0, 1}∞ of all infinite binary sequences is sometimes called the Cantor space.
Understanding outline numbering and how outline numbering interacts with styles is crucial to your success in using Word with legal documents. Basic outline numbering can be handled much the same way as bullets and numbering. Seven default outline numbered lists come with Word. Three of the lists format the paragraphs with outline numbers. These lists are in the top row of the dialog box. The remaining four format the paragraphs with outline numbers and apply heading styles to the paragraphs and can be found in the bottom row.

It's easy to enter a SEQ field manually. Begin by pressing [Ctrl]+[F9]. When Word displays the blank field, enter seq list1, as shown in Figure A. List1 is a required argument; you can use any descriptive name you like as long as it begins with an alpha character. The parentheses distinguish the numbers within the text. They're not part of the field code. Highlight the field code and press [F9] to display the field's value. As you can see in Figure B, the first field returns (1).

LION has an economy line, standard-duty numbering machines in both the 5 wheel & the 6 wheel model. As with the heavy-duty line, these automatic numbering machines are also made from one-piece hardened die-cast metal frame and wheels to assure trouble free operation. This self inking numbering machine is ideal for sequential numbering operations to use as a date and number stamp, serial number stamp, inspection stamp and etc. Best choice for the budget conscious users looking for standard quality, durability and low cost.
That’s enough tips for now. You’ll be filling your fundraising thermometer template How to Create Your Custom Excel Fundraising Thermometer Template How to Create Your Custom Excel Fundraising Thermometer Template Use an Excel thermometer chart to visually keep track of your financial goals. Whether you're saving for a new gadget or fundraising for a good cause, here's a step by step tutorial. Read More in no time. Let’s get to the tickets.

If you make a list of things you need to do, starting with number 1 and continuing until all your tasks are accounted for, then you’ve made a sequential list. Something that is sequential often follows a numerical or alphabetical order, but it can also describe things that aren’t numbered but still need to take place in a logical order, such as the sequential steps you follow for running a program on your computer.
×